1) plastic valve pipe grouting
塑料袖阀管注浆
2) sleeve-valve-pipe grouting
袖阀管注浆
1.
The application of sleeve-valve-pipe grouting in road foundation disease management;
袖阀管注浆法在公路路基病害处治中的应用
2.
Studies of sleeve-valve-pipe grouting technique and its effect on soil reinforcement;
袖阀管注浆技术改性土体研究及效果评价
3) sleeve-valve pipe grouting technology
袖阀管注浆应用
4) sleeve valve grouting
袖阀注浆
1.
Using sleeve valve grouting to treat soft foundation;
袖阀注浆处理软土地基施工技术
5) valve sleeve pipe high pressure grouting
袖阀管高压注浆法
1.
The pressure grouting reinforcemont effective method of quality problems pile is introduced by two examples of the actual works,and the valve sleeve pipe high pressure grouting method is also introducal briefly.
列举两个实际工程事例,介绍压力灌浆法对质量问题桩有效补强,并对袖阀管高压注浆法作扼要介绍。
6) sleeve valve tube static pressure grouting
袖阀管式静压注浆
1.
Combining with the situation of accruing subgrade disease in provincial road Lao-Song line,the author analyzes the causes of disease,provides treatment scheme of sleeve valve tube static pressure grouting,introduces its reinforcement technology and reinforcement mechanism,and discusses the sleeve valve tube grouting,so as to improve application of this technology.
结合省道老松线发生路基病害的情况,对病害的产生原因进行了分析,提出了袖阀管式静压注浆处理方案,对该加固工艺及其加固机理进行了介绍,探讨了袖阀管注浆施工,以推广该工艺的应用
补充资料：塑料阀标准汇总
标准编号 | 标准中文名称 | 标准英文名称 |
GB/T18689-2002 | 农业灌溉设备小型手动塑料阀 | Agricultural irrigation equipment--Manually operated small plastics valves |
NF T54-082-1988 | 塑料.热固塑料阀.耐压和密封性试验 | (PLASTICS. THERMOPLASTIC AND THERMOSETTING VALVES. TEST OF RESISTANCE TO PRESSURE.) |
BS EN 1704-1997 | 塑料管道系统.热塑塑料阀.弯曲情况下温度循环后阀门完整性的试验方法 | (Plastics piping systems - Thermoplastics valves - Test method for the integrity of a valve after temperature cycling under bending) |
EN 28233-1990 | 热塑性塑料阀门 扭矩 试验方法 | Thermoplastics valves- Torque; test method (ISO 8233:1988) |
EN 28659-1990 | 热塑性塑料阀门 疲劳强度 试验方法 | Thermoplastic valves- Fatigue strength- Test method (ISO 8659:1989) |
BS EN 28233-1992 | 热塑性塑料阀门的扭矩试验方法 | (Thermoplastics valves - Torque - Test method) |
BS EN 28659-1992 | 热塑性塑料阀门.疲劳强度.试验方法 | (Thermoplastics valves - Fatigue strength - Test method) |
ISO 7349-1983 | 热塑塑料阀.连接基准 | (Thermoplastics valves; Connection references) |
ISO 8659-1989 | 热塑塑料阀门.疲劳强度.试验方法 | (Thermoplastics valves; fatigue strength; test method) |
ISO 8233-1988 | 热塑塑料阀门.扭矩.测试方法 | (Thermoplastics valves; torque; test method) |
ISO 9393-2 Technical Corrigendum 1-1997 | 热塑性塑料阀门.压力试验方法和要求.第2部分:聚乙烯、聚丙烯、未增塑聚氯乙烯和聚偏氯乙烯阀门的试验条件和 | (Thermoplastics valves - Pressure test methods and requirements - Part 2: Test conditions and basic requirements for PE, PP, PVC-U and PVDF valves; Technical Corrigendum 1) |
ISO 9393-1-1994 | 热塑性塑料阀门.压力试验方法.第1部分:总则 | (Thermoplastics valves - Pressure test methods and requirements - Part 1: General) |
ISO 9393-2-1997 | 热塑性塑料阀门.压力试验方法和要求.第2部分:聚乙烯、聚丙烯、未增塑聚氯乙烯和聚偏氯乙烯阀门的试验条件和 | (Thermoplastics valves - Pressure test methods and requirements - Part 2: Test conditions and basic requirements for PE, PP, PVC-U and PVDF valves) |
ISO 9911-1993 | 农业灌溉设备.手工操做小型塑料阀门 | (Agricultural irrigation equipment; manually operated small plastics valves) |
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条