1) split self-lubrication bearing
剖分式自润滑轴承
1.
The split self-lubrication bearing was applied to substitute the bearing with box which has some problems.
针对带座轴承存在的诸多问题对其进行了改造,引进了更换方便、具有自润滑及耐高温性能的剖分式自润滑轴承。
2) separating glide bearing
剖分式滑动轴承
1.
Locating slot working of the separating glide bearings;
剖分式滑动轴承定位槽的加工
3) self-lube take-up unit
自润滑滑块式轴承箱组
4) self-lubricating bearing
自润滑轴承
1.
PTFE-bronze powder-steel is a widely used three-layer self-lubricating bearing material with good anti-friction and anti-wear.
聚四氟乙烯(PTFE)-铜粉-钢背复合材料是一种广泛应用的三层结构自润滑轴承材料,具有良好的减摩耐磨性能。
2.
This paper introduces the selection and disposal modes of the common planet gear bearing, analyzes the application advantages of cylindrical roller and self-lubricating bearing, and advances some effective approaches on solving the technological difficulties of the design of planet gear bearing with small diameter.
介绍了常用行星轮轴承的选用及布置方式,分析了短圆柱滚子和自润滑轴承的应用优势,提出了解决小直径行星齿轮轴承设计技术难点的有效途径。
3.
Through the problem analysis of bearing on the shea rer walk gear, that a ppeared on the run, introduces a property of self-lubricating bearing and use in the place of shearer walk gear, in the meantime list notice problem bearing in p rocess of us
通过分析采煤机行走轮轴承在使用中出现的一些问题 ,介绍了一种自润滑轴承的特性和在采煤机行走轮部位的使用 ,同时给出了该轴承在使用过程中应该注意的问题。
5) self-lubricating
[英]['self'lu:brikeitiŋ] [美]['sɛlf'lubrɪ,ketɪŋ]
自润滑轴承
1.
Advance in Research and Development of Self-lubricating Composite Used by Bearing Materials in China;
国内自润滑轴承用材料的研究和开发
2.
New composite materials for metal-based self-lubricating bearing are classified into powder-metallurgy types including Fe-based,copper-based,Zn-based and Ni based,and surface-engineering types including Fe-based,Cu-based,Zn-based,Ti-based.
对整体烧结型、镶嵌型金属基自润滑轴承用复合材料的最新进展进行了综述。
6) self lubricating bearing
自润滑轴承
1.
The friction and wear tests of the self lubricating bearing made of carbon fiber reinforced copper matrix composite materials are arranged by uniform design that can greatly reduce the test duration.
同时 ,引入可靠性技术 ,建立了自润滑轴承在不同临界磨损率下材料的可靠度 -压强-速度曲线及其计算方法 ,为碳纤维增强铜基复合材料自润滑轴承的设计提供依
补充资料：自润滑轴承
在工作时间内不需要添加润滑剂的滑动轴承。自润滑轴承有 4种类型。①用石墨、聚四氟乙烯、尼龙等具有良好自润滑性的材料制造的轴承；②用固体润滑剂润滑的金属轴承；③用含有固体润滑剂的复合材料制造的轴承；④在多孔质金属或多孔质塑料中加入润滑油或润滑脂的轴承。常用的固体润滑剂有石墨、二硫化钼、聚四氟乙烯、酞青染料等。为了防止润滑剂流失,后3种轴承都要作成密封组件。自润滑轴承主要用在无法添加或不便于添加润滑剂的工作环境，如高空、 地下、 高温、放射性、有毒的场所，也常用于不允许润滑剂污染的机械和设备，如食品机械、纺织机械、电器开关等。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条