1) cyclic simple shear
循环单剪
1.
In this paper,the cyclic simple shear tests of the saturated soil of saturation 95 %,92 %,88 % and 83 % were carried out under the consolidation pressure of 50 kPa,100 kPa and 200 kPa respectively.
在50,100,200 kPa三种固结压力下分别对饱和度为95%,92%,88%,83%的饱和土样进行了循环单剪试验,得到了4种土样在3种固结压力下的最大动剪模量Gdmax和最大阻尼比Dmax,以及动剪模量比G/Gdmax-γ和阻尼比D/Dmax-γ归一化数值,并进行了对比分析。
2.
The cyclic simple shear tests of the saturated soil with saturation 95%,92%,88% and 83% were carried out under the consolidation pressure of 50 kPa,100 kPa and 200 kPa,respectively.
在50kPa、100kPa和200kPa 3种固结压力下分别对饱和度为95%、92%、88%和83%的土样进行了循环单剪试验,得到了该土样在4种饱和度、3种固结压力下的最大动剪模量Gdmax以及动剪模量比G/Gdmax-γ归一化曲线。
3.
Furthermore,undisturbed samples of each layer soil are taken out,and the maximum dynamic shear modulus is obtained by laboratory cyclic simple shear tests.
此外,取出了场地各层土的原状土样,进行了室内循环单剪试验,获得了各层土的动剪模量,并与剪切波速的计算结果进行了比较分析。
2) cyclic simple shear test
循环单剪试验
1.
Comparison beween the model’s theoretical forecast and the cyclic simple shear test results proves the reliability of the model,and comparison between the model’s theoretical forecast and the Masing’s rule-based models indicates the advantage of the novel model,which can reflect the impact of damping ratio of soil on its dynamic response truly.
理论预测结果与循环单剪试验结果的比较,说明了模型的可靠性。
3) cyclic shear
循环剪切
1.
A comparative study on monotonic and cyclic shear behavior of saturated loose sand under complex stress condition;
复杂应力条件下饱和松砂单调与循环剪切特性的比较研究
4) cyclic torsion shear
循环扭剪
5) cutting sequence
剪裁循环
6) thermal-shearing cycling
热剪切循环
1.
Growth behavior of compounds formed at Sn-3.5Ag-0.5Cu/Cu and Sn-Pb/Cu interfaces during thermal-shearing cycling;
SnAgCu/Cu和SnPb/Cu界面热剪切循环条件下化合物的生长行为
2.
5Cu /Cu interface after thermal-shearing cycling was investigated.
研究了热剪切循环条件下Sn-3。
补充资料：装箱单、重量单、尺码单
装箱单、重量单、尺码单
[装箱单、皿t单、尺码单1装箱单(Pack-ing Ust)是说明货物包装情况的单据，包括包装材料、包装方式，以及详细的包装内容，如花色、规格搭配等。进口地海关主要依据装箱单对某一特定内容的包装内容进行检查，也是进口商核对货物的依据。装箱单的内容有:单据名称、卖方名称、唆头、件数、规格、数量、毛净重、签字等。 重量单(Weight ust)是由卖方或第三者提供的，表明货物重量的单据。一般包括皮、毛、净重。它必须和其他单据上所表示的货物重量一致。 尺码单就不详细介绍了。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条