1) ultimate bearing capacity
极限承载能力
1.
Numerical analysis of the hole configuration on ultimate bearing capacity of rock mass;
孔洞形状对围岩极限承载能力影响的分析
2.
Comparison between two methods for determining ultimate bearing capacity of gravity dam;
两种重力坝极限承载能力判别方法的比较
3.
The ultimate bearing capacity of key welded hollow spherical nodes and rectangle hollow section(RHS) joints of the Beijing A380 hangar, subjected to a specific load, is investigated through theoretical analysis and experiment study.
对北京A380机库的关键焊接空心球节点与焊接矩形钢管相贯节点在特定受力条件下的极限承载能力进行了理论分析与试验研究。
2) ultimate strength
极限承载能力
1.
The fatigue and ultimate strength analysis of hull structure with two different butt-welding lines distribution was researched in this paper.
对两种不同对接焊缝布置下的船体结构进行疲劳强度和极限承载能力分析。
2.
When studying the ultimate strength of gravity dam by strength reserved coefficient method, it found that with the decreasing of material strength, a small yield area appeared in the beginning, and then it enlarged gradually until it went across the upstream to the downstream of the dam.
在采用强度储备系数法计算重力坝的极限承载能力的过程中,随着材料强度的逐步降低,首先在局部小范围出现屈服区,随后这一屈服破坏区范围逐步扩展,直到最后坝体内的屈服破坏区贯通上下游坝面,最后丧失保持平衡的能力,导致重力坝的整体破坏。
3.
A simply and effective analytical tool for longitudinal ultimate strength calculation and reliability analysis of composite ship hull girder is presented in this paper.
把船体甲板或船底板结构视为是一系列加筋板单元的组合 ,然后利用复合材料梁柱理论计算船体加筋板单元构件的极限承载能力 ,最后用 Smith法计算复合材料船体的极限承载能力。
3) ultimate load-carrying capacity
极限承载能力
1.
Study on ultimate load-carrying capacity of long-span suspended arch bridge;
大跨度悬索拱桥极限承载能力研究
2.
3 bridge were investigate by considering thenonlinearity of structures and the ultimate load-carrying capacity of components.
考虑结构的非线性和构件的极限承载能力,并且计入施工过程变形和应力的叠加效应,对南京长江三桥初步设计方案(独塔双柱、双塔独柱和双塔双柱)钢斜拉桥进行了分析,重点研究了施工全过程中的结构稳定性问题。
3.
The first stage is from loading to cracking,the second to yield of the tension steel,and the third to the ultimate load-carrying capacity.
试验结果表明:有粘结预应力AFRP筋混凝土梁的受载全过程可分为三个阶段,即从加载到混凝土开裂,再到非预应力筋屈服,最终达到极限承载力;虽然AFRP筋材没有屈服点,但是其弹性模量较低,因此,试验梁破坏前有明显的变形和预兆;破坏时,AFRP筋应变不一定达到极限,其值可按平截面假定计算;此外,试验表明,适当提高张拉控制力能提高梁的极限承载能力。
4) ultimate load-bearing capacity
极限承载能力
1.
Analysis on ultimate load-bearing capacity of largespan half-through CFST arch bridge;
大跨中承式钢管混凝土拱桥极限承载能力
2.
In order to rationally evaluate the ultimate load-bearing capacity of masonry-infilled frames, a new method based on the two-parameter unified strength theory is proposed for the failure mode that usually appears in practice.
为合理地评估砌体填充框架结构的极限承载能力,针对工程中常见的破坏模式,基于双参数统一强度理论提出了一种新型计算方法。
3.
In addition, the project has improved calculation method of ship ultimate load-bearing capacity, and studied the change law, assessment criteria of residual strength, and method of p.
重点介绍了受损船体剩余强度评估与预报(包括确定船舶危险破损状态,研究船舶破损进程中结构能力和载荷效应变化规律,建立破损结构响应和极限强度分析计算模式以及可靠性评估的动态模型,改进船舶极限承载能力计算方法),并介绍了老龄船舶剩余强度变化规律、评估指标及预报有效寿命期的方法。
5) limit bearing capacity
极限承载能力
1.
To assure the safety of a tunnel anchor-sprayed lining structure, the incremental nonlinear finite element method is proposed to investigate the limit bearing capacity of the lining structure and trace the nonlinear deformation of the lining structure.
为了确保某铁路隧道锚喷支护结构的安全性,采用增量非线性有限元法对该锚喷支护结构进行极限承载能力分析,追踪该支护结构的非线性变形特性。
6) ultimate bearing capacity
极限承载力
1.
Determining and forecasting ultimate bearing capacity of pile based on cusp catastrophe theory;
基于尖点突变理论的基桩极限承载力判定及预测
2.
The application of Grey Theory in the prediction of pile ultimate bearing capacity;
灰色理论在单桩极限承载力预测中的应用
3.
Analysis of ultimate bearing capacity of spatial steel tubular joint;
空间圆钢管相贯节点极限承载力分析
补充资料：侧向极限承载强度
分子式：
CAS号：
性质：用铆钉、螺杆、栓等办法将板材和板材之间搭接，或将板联接于其他部件上时，板材所能承受的最大的平行于板面的载荷除以它们的支撑面积所得的商值，单位MPa。这时，板材穿铆钉(或螺杆等)的孔洞一侧和铆钉柱之间因受局部挤压而发生塑性变形，最后导致板材被拉断。极限承载强度也称侧向极限承载强度。对该值的了解有助于选择铆钉直径和铆钉孔的布置，以利于整体工作强度。
CAS号：
性质：用铆钉、螺杆、栓等办法将板材和板材之间搭接，或将板联接于其他部件上时，板材所能承受的最大的平行于板面的载荷除以它们的支撑面积所得的商值，单位MPa。这时，板材穿铆钉(或螺杆等)的孔洞一侧和铆钉柱之间因受局部挤压而发生塑性变形，最后导致板材被拉断。极限承载强度也称侧向极限承载强度。对该值的了解有助于选择铆钉直径和铆钉孔的布置，以利于整体工作强度。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条