说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 干燥收缩性能
1)  drying shrinkage performance
干燥收缩性能
1.
Adopt polypropylene fibers and polymer emulsion to improve the shock resistance and drying shrinkage performance of cement mortar.
采用聚丙烯纤维和聚合物乳液对水泥砂浆进行改性,并对改性水泥砂浆抗冲击性能和干燥收缩性能进行了实验研究。
2)  dry shrinkage
干燥收缩
1.
Early autogenous shrinkage and dry shrinkage of cement based materials containing ultra-fine fly ash;
UFA水泥基材料早期自收缩与干燥收缩研究
2.
Study on dry shrinkage deformation of concrete perforated bricks;
混凝土多孔砖干燥收缩性能研究
3.
Study on dry shrinkage deformation of concrete perforated brick masonry
混凝土多孔砖砌体干燥收缩性能研究
3)  drying shrinkage
干燥收缩
1.
Autogenous shrinkage and drying shrinkage of cement paste at early aging;
水泥浆体早期的自收缩和干燥收缩
2.
Investigation of drying shrinkage of high volume fly ash concrete;
大掺量粉煤灰混凝土干燥收缩性能
3.
Influence of temperature and humidity on drying shrinkage of cement-based materials;
环境温、湿度对水泥基材料干燥收缩的影响
4)  temperature and dry composite shrinkage property
温度和干燥混合收缩性能
1.
It is concluded that resisting temperature and dry composite shrinkage property of fibre .
对不同种类纤维土材料及相应半刚性材料的混合收缩性能也进行了试验比较分析,得出了纤维半刚性基层材料的抗温度和干燥混合收缩性能优于相应的半刚性基层材料的结论,为防止或减少半刚性基层材料的收缩开裂提供了一种新的途径。
5)  drying shrinkage value
干燥收缩值
1.
It is pointed out that the main reason of wall crack is due to great drying shrinkage of the material,so the first thing is to enhance study and improve production to make the drying shrinkage value of b.
指出材料干燥收缩大是产生墙体开裂的主要原因,首先要加强研究和改进生产,使砖的干燥收缩值达到德国DIN1053-1要求的0。
6)  self-desiccation shrinkage
自干燥收缩
1.
Prediction of high performance concrete self-desiccation shrinkage at early age based on BP neural network;
基于BP神经网络的高性能混凝土早龄期自干燥收缩预测
2.
Relationship among self-desiccation shrinkage and relative density of pastes,average paste thickness of aggregate on high performance concrete at early age;
高性能混凝土早龄期自干燥收缩与浆体相对密度、骨料平均浆体厚度的关系
3.
Experimental study on self-desiccation shrinkage of early-age high performance concrete;
高性能混凝土早龄期自干燥收缩测量方法的研究
补充资料:不锈钢的物理性能、力学性能和耐热性能
不锈钢的物理性能


不锈钢和碳钢的物理性能数据对比,碳钢的密度略高于铁素体和马氏体型不锈钢,而略低于奥氏体型不锈钢;电阻率按碳钢、铁素体型、马氏体型和奥氏体型不锈钢排序递增;线膨胀系数大小的排序也类似,奥氏体型不锈钢最高而碳钢最小;碳钢、铁素体型和马氏体型不锈钢有磁性,奥氏体型不锈钢无磁性,但其冷加工硬化生成成氏体相变时将会产生磁性,可用热处理方法来消除这种马氏体组织而恢复其无磁性。

奥氏体型不锈钢与碳钢相比,具有下列特点:

1)高的电阴率,约为碳钢的5倍。

2)大的线膨胀系数,比碳钢大40%,并随着温度的升高,线膨胀系数的数值也相应地提高。

3)低的热导率,约为碳钢的1/3。

不锈钢的力学性

不论不锈钢板还是耐热钢板,奥氏体型的钢板的综合性能最好,既有足够的强度,又有极好的塑性同时硬度也不高,这也是它们被广泛采用的原因之一。奥氏体型不锈钢同绝大多数的其它金属材料相似,其抗拉强度、屈服强度和硬度,随着温度的降低而提高;塑性则随着温度降低而减小。其抗拉强度在温度15~80°C范围内增长是较为均匀的。更重要的是:随着温度的降低,其冲击韧度减少缓慢,并不存在脆性转变温度。所以不锈钢在低温时能保持足够的塑性和韧性。

不锈钢的耐热性能

耐热性能是指高温下,既有抗氧化或耐气体介质腐蚀的性能即热稳定性,同时在高温时双有足够的强度即热强性。

不锈钢国际标准标准

标准 标准名


GB 中华人民共和国国家标准(国家技术监督局)

KS 韩国工业标准协会规格Korean Standard

AISI 美国钢铁协会规格America Iron and Steel Institute

SAE 美国汽车技术者协会规格Society of Automative Engineers

ASTM 美国材料试验协会规格American Society for Testing and Material

AWS 美国焊接协会规格American Welding Society

ASME 美国机械技术者协会规格American Society of Mechanical Engineers

BS 英国标准规格British Standard

DIN 德国标准规格Deutsch Industria Normen

CAS 加拿大标准规格Canadian Standard Associatoin

API 美国石油协会规格American Petroleum Association

KR 韩国船舶协会规格Korean Resister of Shipping

NK 日本省事协会规格Hihon Kanji Koki

LR 英国船舶协会规格Llouds Register of Shipping
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条