1) three-coordinate measuring machines
三坐测量机
2) CMM
三坐标测量机
1.
Precise Measurement for Pitch Circle Helix Angle of Involute Spur Gear by CMM;
用三坐标测量机精确测量斜齿轮分度圆螺旋角
2.
Research on Dynamic Characteristic of CMM Probe;
三坐标测量机测头系统动态特性研究
3.
Analyzing Method of CMM Dynamic Error Character;
三坐标测量机动态误差特征分析方法
3) Coordinate measuring machine
三坐标测量机
1.
The Computer Aided Measuring System for the Antenna Turning Surface--Coord3 - CMM (Coordinate Measuring Machine) -Based onMeasuring Technolgoy of Turning Surface;
天线回转曲面计算机辅助测量系统——基于Coord3三坐标测量机的回转曲面测量技术
2.
Measure software MworksCAD based on coordinate measuring machine;
基于三坐标测量机的测量软件MworksCAD
3.
Design and Realization of Stereo Vision Measuring Probe Based on 3D Coordinate Measuring Machine;
基于三坐标测量机的立体视觉测头设计与实现
4) Three-coordinate measuring machine
三坐标测量机
1.
Fully utilizing three-coordinate measuring machine to improve students engineering practice capacity;
充分利用三坐标测量机培养学生工程实践能力
2.
The article discusses the measuring method for coaxiality by three-coordinate measuring machine, and at the same time discusses the differences of several method
文章讨论了利用三坐标测量机测量同轴度误差的方法,并给出了各种方法之间的区别。
3.
Based on slideway straight-line-level error、right-angle error、temperature error and non rigid body error,we analyse comprehensive accuracy of three-coordinate measuring machine with probabilistic method.
考虑到三坐标测量机的导轨直线度误差、直角误差、温度误差以及非刚体误差同时存在,通过概率统计的方法对三坐标测量机的综合精度进行分析。
5) three coordinate measuring machine
三坐标测量机
1.
A Research on Converse Design of Surface Parts Based on Three Coordinate Measuring Machine;
基于三坐标测量机的曲面零件逆向设计研究
2.
Aiming at auto steering pole′s envelopes based 3D model which is created in converse design by the three coordinate measuring machine,the detail dimensions error analysis is included,which is based on the comparison between UG model and part prototype.
针对采用三坐标测量机对转向器上护罩进行逆向设计后生成的三维模型,通过UG软件建模及分析功能,把建立的模型与该零件原形相比较,进行详细的尺寸误差分析,探讨误差产生的基本原因和减小误差的基本方法,确立了测量方法的正确途径。
3.
A new digital measure method was presented based on the three coordinate measuring machines.
在三坐标测量机的基础上给出了一种数字化测量曲面轮廓的方法,通过测球半径的补偿、坐标系的建立、最佳测量路径的规划以及混合编程扫描,提高了测量精度及扫描测量的效率,而且采集到的数据可以反映曲面的几何特征,并以实例对该方法进行说明,得到了数字化的曲面轮廓数据。
6) Coordinate Measuring Machine(CMM)
三坐标测量机(CMM)
补充资料：昆明池晏坐答王兵部珣三韵见示
【诗文】：
画舸疾如飞，遥遥泛夕晖。石鲸吹浪隐，玉女步尘归。
独有衔恩处，明珠在钓矶。
【注释】：
【出处】：
全唐诗：卷73_12
画舸疾如飞，遥遥泛夕晖。石鲸吹浪隐，玉女步尘归。
独有衔恩处，明珠在钓矶。
【注释】：
【出处】：
全唐诗：卷73_12
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条