1) deflection value
弯沉值
1.
Research on the compactness connected with deflection value in highway enginnering;
道路工程中压实度与弯沉值关系的研究与探讨
2.
Combined with the practice,the paper discussed the importance of detection rebound deflection value for county road reconstruction.
从农村公路建设模式和经济现状等方面通过列举实例论述了检测回弹弯沉值的重要性。
2) deflection
[英][dɪ'flekʃn] [美][dɪ'flɛkʃən]
弯沉值
1.
With the FEA method, the author calculated and analyzed the deflections of the pavement under dynamic loadings with different loading cycles, and compared the life ratio under different loading cycles as well.
4s之间时路面动弯沉值显著大于静弯沉值,其中,当加载周期为0。
2.
Based on this,different cavity dimension,height,shape and areas beneath cement concrete slab s influence on deflection were analyzed.
在此基础上,分析了脱空尺寸、脱空高度、脱空形状以及脱空面积对脱空路面板弯沉值的影响。
3.
Then the deflections of the pavement under the non-uniform distributed dynamic loads were calculated and analyzed,and the life ratios(LR) at different velocities were compared with the axle exchange methods.
在不考虑超载情况下,为探求重载货车行车速度对沥青路面使用寿命的影响,采用层状体系理论,建立AN SYS 3-D有限元粘弹性路面结构模型;针对不同车速及非均布动荷载作用下路表面弯沉值的变化进行了计算和分析,并利用轴载换算方法对仿真结果在不同车速下的寿命比进行了比较。
3) flexure value
弯沉值
1.
Combined with the project practice of superficial mud jacking of asphalt pavement of one freeway in Guangdong province,it introduces construction technology of superficial drilling mud jacking,and compares the flexure value of after superficial drilling mud jacking with before,analyses the reasons of the rapid increasing of strengthening effect and it prompted value.
结合广东某高速公路沥青路面浅层压浆加固的工程实例,介绍了浅层钻孔压浆的施工工艺,把浅层钻孔压浆后的沥青路面的弯沉值与加固之前的相比较,分析加固效果能迅速提高的原因及其推广价值。
4) theoretic rebound deflection
理论弯沉值
1.
The calculation of theoretic rebound deflection and test standard of deflection in construction;
理论弯沉值的计算及施工弯沉检验标准
5) inspection of deflection value
弯沉值检测
6) rebound deflection
回弹弯沉值
1.
rebound deflection is an important measure to evaluate dry unit weight and bearing capacity of pavement structure layer.
检测路基路面的回弹弯沉值,可以反映路基路面结构的密实性以及路基路面的综合承载能力,通过同设计标准相比较,以确认该公路工程的施工是否满足工程质量的要求。
补充资料:聚沉值
分子式:
CAS号:
性质:在指定条件下使胶体发生聚沉所需的电解质的最低浓度,通常以mmol/L为单位。
CAS号:
性质:在指定条件下使胶体发生聚沉所需的电解质的最低浓度,通常以mmol/L为单位。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条