1) frame-shear wall structure
框架-剪力墙结构
1.
The 18-story frame-shear wall structure is used for an office building named HuiLongyuan in harbin.
哈尔滨慧隆苑办公楼采用18层框架-剪力墙结构,由于功能要求,须对其17、18两层原结构施工图进行抽柱修改设计。
2.
quadratic lateral load pattern) which can include uniform lateral load pattern,triangular lateral load pattern and multimode lateral load pattern is set up,and the drift computation formula of frame-shear wall structure under the quadratic lateral load distribution is deduced.
推导了二次曲线侧向荷载分布作用下,框架-剪力墙结构的水平位移曲线。
3.
Based on considering the bending deformation Of shear walls, the optimum stiffness of shear wall in a frame-shear wall structure was analyzed in this paper in six combined cases with the hoal deformation of side columns of frame or walls, the shear deformation of shear walls and the different coupling of binding beams.
本文在考虑剪力墙弯曲变形基础上，由框架边柱（墙）轴向变形、剪力墙剪切变形和连系梁不同联接等三种因素，分六种组合情况，分析框架－剪力墙结构中剪力墙的最优刚度。
2) frame-shearwall structure
框架-剪力墙结构
1.
With the development of architecture,the marginal structural system between frame structure and frame-shearwall structure or shearwall structure and frame-shearwall structure has occurred.
为了解决框架结构与框架-剪力墙结构以及剪力墙结构与框架-剪力墙结构之间的边缘结构体系的设计问题,对这类结构进行了认定分析,对这种结构在设计中存在的误区做了全面的归纳总结,并对这类结构提出了设计建议,分析表明:此类结构不可以完全按照框架—翦力墙结构体系进行设计;最后还提出了这类结构的研究展望。
2.
frame-shearwall structure with special-shaped columns are considered, the lateral stiffness of shear wall in mid-highrise residential buildings of RC.
综合考虑剪力墙剪切变形、异形框架柱轴向变形和连梁刚度对异形柱框架-剪力墙结构的抗侧刚度的影响,对抗震设防区的中高层钢筋混凝土异形柱框架-剪力墙结构体系住宅进行剪力墙抗侧刚度的优化,同时采用底部剪力法分析剪力墙抗侧刚度与水平地震作用的关系,考虑层间位移、刚重比、剪重比等约束条件建立优化数学模型,并结合新规范给出模型的数值解。
3.
The building uses reinforced concrete frame-shearwall structure.
鼎好电子商城二期工程采用钢筋混凝土框架-剪力墙结构,地上通过钢结构连廊与一期相连。
3) frame-wall structures
框架-剪力墙结构
1.
Reliability and performance based optimization designfor seismic RC frame-wall structures;
基于可靠度和功能的框架-剪力墙结构抗震优化设计
2.
Aimed at investigating three-dimensional inelastic earthquake response of frame-wall structures subjected to big earthquake,this paper discribes the adoption of fiber element model to analysis of shaking table tests of a nine story 1 ∶6 scale frame-wall structure model.
为研究大震下框架-剪力墙结构三维弹塑性地震反应,采用纤维模型(CANNY99),对九层1:6钢筋混凝土框架-剪力墙结构振动台实验模型进行地震反应分析。
3.
In order to research the performance of the RC eccentricity frame-wall structures,shaking table tests of three-story reinforced concrete frame-wall model were carried out by inputting different degrees of El-centre wave and the test analysis was introduced in this paper.
目的研究钢筋混凝土偏心框架-剪力墙结构在地震作用下受力性能。
4) frame-shear wall
框架-剪力墙结构
1.
In the analysis of frame-shear wall,the plane rectangular element(GR12M) with rotational freedoms can greatly improve the performance of elements without incr.
结果表明,把带转角自由度的矩形平面单元用于框架-剪力墙结构分析,在不增加单元自由度的情况下大大改善了单元的性能,单元列式简单,保证收敛,可以自然地解决框架-剪力墙结构的连接问题,还能获得很高的精度,而且能为平板壳结构分析提供有效的膜元。
5) frame-shear structure
框架-剪力墙结构
1.
the successive and cooperating model of frame-shear structure and the finite element model developed by the authors to reflect the characteristics of frame-shear structure are used to carry out the comparative computation of natural vibrational periodic coefficient.
推导了框架-剪力墙结构自振周期方程,利用两种计算模型,即框架-剪力墙的连续化协同工作计算模型和笔者建立的反映框架-剪力墙结构特点的有限元模型,对比计算结构自振周期系数。
6) frame-shearwall structure
框架剪力墙结构
1.
This paper aims at the crack of frame-shearwall structure floor.
本文针对框架剪力墙结构楼板产生的裂缝,考虑相关荷载作用,采用有限元方法进行分析,得出裂缝成因,并为今后防止和减少类似裂缝的产生和发展从设计方面的结构构件布局、配筋形式等方面提供理论借鉴。
补充资料：剪力墙
| 剪力墙 shear wall 房屋或构筑物中主要承受风荷载或地震作用引起的水平荷载的墙体。防止结构剪切破坏。又称抗风墙或抗震墙、结构墙。分平面剪力墙和筒体剪力墙。平面剪力墙用于钢筋混凝土框架结构、升板结构、无梁楼盖体系中。为增加结构的刚度、强度及抗倒塌能力，在某些部位可现浇或预制装配钢筋混凝土剪力墙。现浇剪力墙与周边梁、柱同时浇筑，整体性好。筒体剪力墙用于高层建筑、高耸结构和悬吊结构中 ，由电梯间、楼梯间、设备及辅助用房的间隔墙围成，筒壁均为现浇钢筋混凝土墙体，其刚度和强度较平面剪力墙高可承受较大的水平荷载。 |
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条