1) CCD configuration
CCD驱动单元配置
2) drive unit
驱动单元
1.
A mathematic model to describe the traveling-capability of drive unit of tri-axial differential in-pipe robot in elbow was presented,which included its differential velocity and mechanics property in elbow.
为了描述三轴差动式管道机器人驱动单元的弯管通过性,建立了驱动单元在弯管处的运动方程与平衡方程,分析了其在弯管处的差速特性与力学特性。
3) driving unit
驱动单元
1.
Design of driving unit for the mechanically self-adapting typed pipeline robot
机械自适应型管道机器人驱动单元的设计
2.
With the driving unit of Voith Turbo company as the example, the strength test method for the driving unit frame combined with the finite element calculation is described.
以Voith Turbo公司驱动单元为例,介绍了与有限元计算相结合的驱动单元构架的强度试验方法。
3.
In the light of the composition, running resistance, highest speed, residual acceleration and way of supply for high speed maglev vehicles, it is probed the driving unit capacity of the supply.
依据高速磁悬浮列车的编组、运行阻力、最高速度、剩余加速度以及供电方式等,对其供电系统中驱动单元容量进行探讨,并给出了高速磁悬浮供电系统驱动单元容量及大功率牵引模块容量的计算方法。
4) configuration unit
配置单元
1.
The product family structure model based on configuration unit is presented and configuration unit is explained.
分析了三种主要的生产模式及其演变,在分析产品族结构形成过程的基础上提出基于配置单元的产品族结构模型,并对配置单元进行了论述。
2.
Complying with product configurability,three kinds of configuration unit including basic configuration unit,geometric convertible configuration unit and structure convertible configuration unit were presented,and knowledge representation was constructed.
依据产品可配置性,给出了基本配置单元、几何可变型配置单元和结构可变型配置单元3种配置单元,建立了配置模型的知识表达方法,分析了结构变型配置单元间的约束关系、配置规则表达及其求解匹配过程,并建立了约束规则和变量条件的配置设计深度优先求解算法,利用质量功能配置建立了客户需求、产品技术指标与配置单元功能模块之间的映射矩阵。
5) CCD driver
CCD驱动器
1.
Thermal design of CCD driver and its temperature changing in the course of taking picture of space remote sensor;
遥感器CCD驱动器热设计及其在摄像过程中的温度变化
2.
Bias voltages of CCD are designed by LM117T and LM317T;CCD drivers are designed with DS0026;the programmable logical device of the EPF10K30RI240-4 of Company Altera is used for the design of CCD driving time order.
针对e2v公司的CCD67BackIlluminatedNIMO型CCD,对其驱动能力进行详细的分析;选用LM117T和LM317T设计CCD所需的偏置电压;DS0026来完成设计CCD驱动器;Altera公司的可编程逻辑器件EPF10K30RI240-4来设计CCD的驱动时序。
3.
A method for forming programmed CCD driver with a MCS-51 single-chip computer is provided.
介绍用MCS-51单片机、使用单周期指令编程形成编程式CCD驱动器的方法。
补充资料：CCD
分子式：
CAS号：
性质： 由光电二极管阵列经光电变换、贮存的信号电荷用CCD模拟转换寄存器输送、顺次读出的影像感受器，由感光部、输送部、输出部构成。主要用于电子照相。
CAS号：
性质： 由光电二极管阵列经光电变换、贮存的信号电荷用CCD模拟转换寄存器输送、顺次读出的影像感受器，由感光部、输送部、输出部构成。主要用于电子照相。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条