说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 分割点
1)  division point
分割点
1.
The main idea of the Bi-directional and Double-original algorithm is to divide the stock into two parts using the local optimal principle,and set the division point as the original of the two layout region which is layout using improved approximate algorithm.
该算法的主要思想是:首先采用局部最优原则,将板材划分成两段,然后将该分割点设定为两个待排区域的原点,最后采用改进的近似算法对其进行排样。
2.
We can transform the area dividing problem of irregular polygon into that of triangles by geometric drawing and in this way, it is possible to divide the area at any division point on its side.
利用同底等高(或等底同高)的三角形面积相等的原理,通过几何作图方法,把不规则平面条边形面积分割问题转换为三角形面积分割问题,从而实现分割点在周边任意位置处的不规则多边形的面积分割。
3.
The adaptive algorithm to reduce a biquadratic Bézier curve to piecewise quadratic Bézier curves which based on curve sub-division points is presented.
针对Bézier曲线,提出了一种基于分割点技术的四次Bézier曲线自适应降二阶的算法。
2)  point cloud segmentation
点云分割
1.
A new method for laser point cloud segmentation is proposed,by which the point cloud was mapped onto the CCD image along with the method of extrinsic calibration of CCD image.
提出了一种新的激光点云分割方法,该方法采用点云与CCD图像外部标定的方法,将点云标定到CCD图像上,然后通过图像分割的方法实现了快速提取感兴趣目标区域内的点云。
2.
The improved extrinsic calibration method was proposed,and then a novel method for point cloud segmentation was presented,and finally the 3D reconstruction a.
本文结合激光雷达对空间三维数据采集的高速性以及CCD图像处理的快速和便利性,将激光雷达和CCD外部标定算法首次运用在物体三维建模中,提出了改进的外部标定算法,研究了基于外部标定算法的点云分割,并对分割后的点云进行三维重建和纹理映射,取得了较好效果。
3)  node-partition
节点分割
1.
In the research of election algorithm for the mobile agent system,previous researchers mainly focus on the node-partition and partition-merge problems,and pay little attention to problems such as convergence,unlimited diffusion and function conformity of system platform.
针对移动代理系统中的选举算法,前人的研究主要集中于节点分割和分区融合问题,而很少研究选举过程中的收敛、无限扩散以及系统平台的功能整合问题。
4)  midpoint subdivision
中点分割
1.
In order to fully use this simple algorithm to reject most invisible lines, two sets of inclined parallel orthogonal lines passing through four corners of the original window are constructed, forming a filtering window to carry out the midpoint subdivision algorithm.
算法既保持了传统中点分割算法的特有优点 :无需乘除、硬件实现简单 ,又大大降低了冗余线段的裁剪计算量 。
5)  Split node
分割结点
6)  Defect Segmentation
疵点分割
1.
The whole defect detection system is divided into 3 levels: defect judgment,defect segmentation and defect classification.
对基于机器视觉的各种织物疵点检测方法进行综述,将检测系统分成3个层次:疵点判别、疵点分割和疵点分类,给出了对各个层次的要求和完成的目标,并将已经提出的大多数疵点检测方法按其特点归类到3个层次中,具体描述了各类方法的优缺点,分析其实用性,最后总结了该领域的发展趋势。
补充资料:闭式单点、双点压力机
代码:00413
设备名称:闭式单点、双点压力机
型号规格:公称力≥800kN
计量单位:台
主要参数内容
国际先进国内先进国内一般国内落后评定方法及说明
(一)加工精度
    参照GB10924-89、GB10933-89、JB5200-91
1、滑块下平面对工作台上平面的平行度(mm)
30%精度储备20%精度储备达到规定值大于规定值 
0.02+0.10/100×滑块下平面的被测长度
     
2、滑块行程对工作台上平面的垂直度
30%精度储备20%精度储备达到规定值大于规定值 
0.05+0.02/100×滑块行程长度
     
(二)结构性能
     
1、离合器、制动器接通率,当滑块行程次数≤16次/分时为70%,≤25次/分时为60%,≤45次/分时为50%
大于规定值10%大于规定值达到规定值达不到规定值 
2、液压超负荷保险装置、微调装置、吨位指示器
全部具有全部具有部分具有没有 
(三)噪声dB(A)
     
1、公称力≤400kN
≤85≤87≤88>88 
2、公称力>400kN
≤87≤88≤90>90 
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条