1) high pressure revolve spray pile injecting
高压旋喷桩注浆法
1.
On the construction of high pressure revolve spray pile injecting foundation management;
浅谈高压旋喷桩注浆法地基处理的施工
3) single-pipe high pressure jet grouting method
单管高压旋喷注浆法
4) high pressure jet grouting
高压旋喷注浆
1.
Application of high pressure jet grouting technique in pile foundation strengthening of bridge;
高压旋喷注浆在桥梁桩基补强中的应用
2.
After analysis and comparison in construction time and cost,high pressure jet grouting technique was chosen for the enforcement and the enforcement effect was satisfactory.
经过工期和经济分析对比,决定采用高压旋喷注浆技术加固存在缺陷桩体,效果良好。
3.
Based on the loading test of high pressure jet grouting in loess area, the effect of high pressure jet grouting stabilizing loess foundation is studied .
采用高压旋喷注浆法对黄土地基加固进行了试验，研究分析了影响旋喷桩承载力的因素，对单桩承载力的计算公式提出了改进建议。
5) jet grouting
高压旋喷注浆
1.
By adopting jet grouting,ground water was controlled effectively,and thus further excavation and implementation of the scheme of grouted rubble revetment were ensured.
采用高压旋喷注浆进行止水防渗处理后,地下水得到了有效的控制,保证了基坑进一步开挖和浆砌块石护坡方案的顺利施工。
2.
Jet grouting parameters and their influence on the design parameters such as grout grading,layout of grouting holes,grouting depth,grouting capacity and grouting pressure were discussed.
结合用注浆沉降法并辅以高压旋喷注浆对某小区典型不均匀沉降建筑物进行纠偏和地基加固的工程实例,着重分析了注浆沉降法纠偏加固的技术原理,并讨论该工法的控制要点;对注浆浆液配合比、注浆孔平面位置、加固深度、注浆量、注浆压力、高压旋喷注浆等设计参数的影响进行了研究探讨,提出加强纠偏加固施工动态控制的重要性。
3.
The technique of jet grouting was firstly applied in Japan in the end of the 1960 s and gradually applied and developed in the geotechnical field of China since the middle 1970 s.
高压旋喷注浆 (JetGrouting) 6 0年代末出现在日本。
6) high-pressure jet grouting method
高压喷射注浆法
1.
In this paper,the handling of impermeability protection of the durability of the piles by installing lateral waterproof curtain formed by high-pressure jet grouting method .
介绍采用高压喷射注浆法设置侧向帷幕的方法,对钻孔灌注桩进行耐久性抗渗防护处理。
2.
Owing to the advantage of high-pressure jet grouting method, its application scope will be wider and wider in highway engineering construction.
路基及结构物如出现异常下沉或桩基础的承载力不足等现象,需要对其进行加固补强,其中一个有效的办法就是使用高压喷射注浆法。
3.
After analyzing the causes,it is treated in the way of high-pressure jet grouting method,after all,the foundation achieves the design criteria and passes the control check.
广州市某花园工程,基础采用钻孔灌注桩,桩基检测后发现部分桩存在质量问题,经分析原因后,采用高压喷射注浆法进行处理后,达到了设计要求,顺利通过验收。
补充资料：陶瓷注浆成型法
陶瓷注浆成型法 陶瓷成型技法之一。在配料中加入较多水分（25—32%），调成泥浆，注入有吸水性的石膏模子内，吸去一部分水分，脱模即得生坯。用于形状复杂或大件制品的成型。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条