1) colored sand for asphalt shingle
沥青瓦用彩砂
1.
This paper introduces quality requirements of raw materials and production technology of colored sand for asphalt shingle based on the standard, explaining how to determine the main performance index of colored sand.
从沥青瓦用彩砂标准的角度,介绍了适用于沥青瓦的彩砂的原料要求及制备工艺,并对标准中彩砂主要性能指标的确定作了说明。
2) coloured asphalt shingle
彩色沥青瓦
1.
Development of coloured asphalt shingles;
彩色沥青瓦的研制和开发
3) aphalt shingle
沥青瓦
1.
Analysis of actual roofing constuction for villas with the aphalt shingle;
沥青瓦屋面施工质量风险分析及实用对策
4) colored asphalt
彩色沥青
1.
Study on component and using performance of aging colored asphalt;
彩色沥青老化组成及性能的研究
2.
Heavy fraction of Karamay naphthenic crude was used as the basic component to prepare a new type of polymer modified colored asphalt for road pavement.
以克拉玛依优质的低凝环烷基稠油馏分为基础原料,加入填充剂、改性剂等助剂,采用加热搅拌的工艺技术,使各组分很好地熔融为一体,生产出聚合物复合改性的道路用改性石油基彩色沥青系列产品。
5) asphalt sandstone
沥青砂岩
1.
Characteristics of fluid inclusions and hydrocarbon accumulation mechanism of marine sandstone reservoir:with Silurian asphalt sandstone in central Tarim basin as an example
海相砂岩储层流体包裹体特征与成藏时期——以塔中志留系沥青砂岩为例
2.
Impact on reservoir quality of oil/gas filling into reservoir of asphalt sandstones has been studied by means of laboratory simulation.
通过模拟实验的方法分析了油气充注对沥青砂岩储集性的影响,早期充填沥青少而残余孔隙率、渗透率很低的砂岩,晚期油气仍不能充注,是非储层;早期沥青均匀充填、充填程度高,残余孔隙率、渗透率低的砂岩,晚期低粘度稀油仍能充注,孔隙率、渗透率有大幅度提高,是有效储层;早期沥青充填较均匀,残余孔隙率相对较高,不同粘度的原油充注后,孔渗条件发生明显的改善。
3.
The Silurian asphalt sandstone is widespread in Tazhong area of Tarim basin and mainly found in the upper slope of paleo-uplift and oil-generating basin of Lower Paleozoic, which shows that the widespread asphalt sandstone could be the outcrop of paleo-oil pools in this area.
塔里木盆地塔中地区广泛分布着志留系沥青砂岩,主要分布在古隆起和早古生代生油盆地的上倾方向,表明本区规模巨大的志留系沥青砂岩可能为古油藏露头带。
6) tar sand
沥青砂
1.
The necessity of tank cathodic protection is detailed and impact of tar sand and electric insulation on cathodic protection system is highlighted.
阐述了储罐阴极保护的必要性,并重点探讨了沥青砂层及电绝缘对阴极保护系统影响的问题。
补充资料:磨具:砂瓦
用磨料和结合剂製成的块状固结磨具。砂瓦大多数用刚玉或碳化硅磨料和树脂结合剂製成﹐也有少量用陶瓷或菱苦土结合剂製造的﹐通常是数块砂瓦固定在砂轮夹盘上镶装成组合体后使用(图1 砂瓦组合体的示例 )﹐每块砂瓦之间一般有一定间隔﹐便於散热和排屑。砂瓦主要用在立轴磨床上粗磨金属工件的大平面﹐也用於石材和水磨石地面的磨光。由於装夹方式不同﹐砂瓦的形状也不一样﹐按横断面形状可分为平形(矩形)﹑扇形﹑平凸形和梯形砂瓦等(图2 砂瓦断面图 )。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条