1)  indentation diameterr
压痕直径
2)  indentation diameter measurement
压痕直径测量
1.
Auto-focusing technique is an important method to improve the precision,inteiligentization,automatization for the indentation diameter measurement.
自动聚焦技术是提高压痕直径测量系统测量精度、智能化和自动化的重要手段。
3)  indentation
压痕
1.
Molecular dynamics simulation of stress-induced crystallization behavior during indentation for metallic glass;
分子动力学模拟金属玻璃压痕过程的应力晶化行为
2.
Micro-residual Stress Measurement Using Vickers Micro-indentation;
采用显微硬度压痕法测量微区残余应力
3.
Finite element modelling of diamond indentation in MgO;
MgO钻石形锥体压痕的有限元分析
4)  dimple
压痕
1.
Study on the relationship of technology modes and dimple of sheet metal parts in multi-point forming;
多点成形时工艺方式与工件压痕的关系研究
2.
Numerical simulation of dimples and analysis of limit forming forces in multi-point forming of sheet metal;
多点成形中压痕的数值模拟及极限成形力的分析
3.
In this paper, the numerical simulation study adopting dynamic explicit algorithm FEM is carried out to analyze the multi-point forming process with the elastic medium cushion, and the analysis on the dimple defect is proposed.
应用动态显式有限元算法对使用弹性介质的多点成形过程进行数值模拟研究,分析成形过程中产生的压痕缺陷。
5)  creasing
压痕
1.
Dynamic Simulation Analysis on the Creasing and Folding Process of Corrugated Board;
瓦楞纸板压痕折叠过程的动态仿真分析
2.
The APDL(ANSYS Parametric Design Language) was used in this paper to simulate the creasing and folding process of corrugated board.
基于APDL(ANSYS Parametric Design Language)语言建立了瓦楞纸板仿真模型,运用接触分析及MPC(Mul-tipoint Constraint)技术,在考虑瓦楞纸板材料非线性及几何非线性的基础上,对瓦楞纸板的压痕及折叠过程进行了模拟仿真,得到了瓦楞纸板的变形图、最大应力及应力分布情况,为完善工艺流程提供了理论依据。
3.
So the machine is capable of completing die-cutting and creasing successfully.
根据计算机内包装纸盒展开图样,由激光束直接加工材料表面达到模切和压痕效果,以激光的非接触式加工代替了传统的机械加工,不再需要木质镶刀模切板,从而降低了生产成本。
6)  nano-indentation
纳米压痕
1.
Development of Simulation Software Applied to Nano-indentation;
纳米压痕仿真软件系统的开发
2.
The Oliver-Pharr method,one of the most useful calculating methods of nano-indentation,is introduced.
介绍纳米压痕法常用的Oliver-Pharr方法的计算原理,对硬度的概念做了进一步讨论。
3.
The principle of nano-indentation and the test methods to measure modulus of PBX are described.
介绍了纳米压痕方式测定塑料粘结炸药弹性模量的理论和实验方法。
参考词条
补充资料：当量比表面直径、表面积体积平均直径
分子式：
CAS号：

性质：又称当量比表面直径、表面积体积平均直径。是颗粒群表面积分布的平均直径。其意义为与颗粒群的粒形相同，总体积相同、总表面积相同，且粒度均匀的一个假想颗粒群的粒度。亦即指与该颗粒群的粒形相同，比表面积相同的一个颗粒的粒度。 

说明：补充资料仅用于学习参考，请勿用于其它任何用途。