1) centrifugal compressor
离心式压气机
1.
The CFD simulation has been accomplished for a centrifugal compressor impeller with splitter, under the inlet conditions of boundary-layer deficit and jet flow respectively, near shroud of the impeller.
对于带分流叶片的离心式压气机叶轮,在顶部边界层亏损和喷气等进口条件下对叶轮内部流场进行了CFD数值模拟,对比分析了进口喷气处理对改善内部流动、提高稳定性的机理。
2.
The objective of the present paper is to study the vortices motions in the impeller ofvaneless diffuser of centrifugal compressor by numerical computations.
本文的目的是用数值计算方法来研究离心式压气机叶轮内的旋涡运动。
2) centrifugal compressor
离心式压气机，离心压气机，离心式压缩机
3) Centrifugal compressor
离心压气机
1.
Low specific speed centrifugal compressors for automotive fuel cell systems;
车载燃料电池低比转速离心压气机设计
2.
Analysis of deterministic stresses in a centrifugal compressor;
离心压气机确定应力场分析
3.
Integrated inverse problem optimization method of through-flow design/airfoil design/CFD simulation for centrifugal compressors;
离心压气机通流/造型/CFD参数化优化设计集成反问题方法
4) no-oil centrifugal air compressor
无油离心式空气压缩机
1.
Technical Modification of Cooling mode in no-oil centrifugal air compressors;
无油离心式空气压缩机冷却方式的改进与实践
5) Centrifugal air compressor
离心式空气压缩机
1.
Attention problems during the installation process of centrifugal air compressor
离心式空气压缩机组安装过程中应注意的问题
2.
The paper introduces the constant pressure control of C128M×4 centrifugal air compressor,the surge monitoring and the controlling,and analyzes the trouble reasons of 1# machine caused by the high air temperature at the 3-rated entrance,2-rated surge and the processing,then puts forward maintenance measures for the machine hereafter.
介绍了C128M×4型离心式空气压缩机的恒压控制方式及喘振检测和控制,分析了1#机由于三级入口温度高跳车及二级喘振故障发生的原因及处理过程,并对此类机型今后的维护工作提出了自己的观点。
3.
Based on the dynamic analysis of the foundation of the large centrifugal air compressor from Germany the form and dimension of the foundation are determined.
通过对自德国引进的大型离心式空气压缩机的基础的动力分析 ,确立了基础形式和几何尺寸 ,采取一种新的基础动力计算方法 ,使基础设计满足工程的使用要求 ,避免了基础与动力机器的共振。
6) centrifugal chlorine compressor
离心式氯气压缩机
1.
Through analysis of the design technique of LYJ1500 centrifugal chlorine compressor,the reasons for its high discharge temperature and short discharge rate are found,and methods to improve it are proposed.
通过对ＬＹＪ１５００ 离心式氯气压缩机设计技术的分析，找出了该机排气温度较高及气量不足等原因，并提出了改进措施。
补充资料：离心式卸料斗式提升机
分子式：
CAS号：
性质：斗式提升机的一种，见斗式提升机。它是应用最为广泛的斗式提升机。卸料则是利用料斗和物料越过头部回转轮时产生的离心力卸料，头部滚筒的直径，卸料所需的离心力决定提升机的提升输送速度。
CAS号：
性质：斗式提升机的一种，见斗式提升机。它是应用最为广泛的斗式提升机。卸料则是利用料斗和物料越过头部回转轮时产生的离心力卸料，头部滚筒的直径，卸料所需的离心力决定提升机的提升输送速度。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条