1) pull-in
[英]['pulin] [美]['pʊl,ɪn]
吸合
1.
Dynamic pull-in of magnetostatic micro-devices
电磁驱动微器件动态吸合特性分析
2.
Based on the electrostatically actuated model of fixed-fixed beam,the change of pull-in voltage with thermal stress was calculated,and the results were in agreement with those simulated by Coventor Ware.
建立了多晶硅薄膜的热学模型,计算了电流加热后产生的热应力;然后用双端固支梁静电吸合模型计算出吸合电压随热应力的变化,此变化与Coventor Ware软件模拟出的结果一致。
3.
The pull-in phenomenon without the electrostatic torque is studied, and a critical characteristic dimension is derived.
外加电压为零时,导出了旋转式致动器在Casimir力作用下发生吸合的临界特征几何尺寸。
2) complex adsorption
络合吸附
1.
In the paper, the density functional theory and the cluster model approach have been applied to study complex adsorption of carbon monoxide on activated carbon loaded with cuprous salt.
载铜活性炭对CO的络合吸附能在50～60kJ/mol之间,远大于活性炭对CO的物理吸附能(9。
3) adsorption polymerization
吸附聚合
1.
Polyaniline/carbon black composites were synthesized with ferric chloride as oxidant by adsorption polymerization in hydrochloric acid aqueous solution.
用导电炭黑(C)吸附聚合工艺,以三氯化铁(F eC l3)为氧化剂,在盐酸(HC l)环境中制备聚苯胺/炭黑(PA n/C)导电复合材料。
5) mixed adsorption
混合吸附
1.
Microcosmic mechanism of coal surface to multiple gas molecules mixed adsorption;
煤表面对多种气体分子混合吸附的微观机理
6) pull-in voltage
吸合电压
1.
Analysis and measurement of pull-in voltage of grating moving light modulator based on MOEMS
MOEMS光栅平动式光调制器的吸合电压分析与实验
2.
A novel method for calculating Young s modulus and residual stress of a MEMS film is proposed based on pull-in voltages of a set of fixed-fixed beams.
文中首先简要介绍现有的一些主要的材料参数提取方法,然后提出了一种无需静电作用下两端固支梁吸合电压的显式解析表达式,而是利用决定静电作用固支梁弯曲挠度的微分方程直接计算吸合电压,再提取材料参数的算法。
3.
An electrostatically actuated in-situ measuring method for average stress gradient and elastic modulus of a MEMS film was proposed based on pull-in voltages of a set of cantilevers.
提出了一种利用静电作用下悬臂梁的吸合电压提取MEMS薄膜沿厚度方向的平均应力梯度及弹性模量的方法,该方法的关键在于实现悬臂梁吸合电压的快速、精确计算。
补充资料：吸收合并
又称兼并，是指两个或两个以上的企业合并成为一个单一的企业，其中一个企业保留法人资格，其他企业的法人资格随着合并而消失。
吸收合并完成后,只有合并方仍保持原来的法律地位,被合并企业失去其原来的法人资格而作为合并企业的一部分从事生产经营活动.合并后的企业除对所有被合并企业的原资产实行直接控制和管理外,还往往承担被合并企业的负债。
吸收合并完成后,只有合并方仍保持原来的法律地位,被合并企业失去其原来的法人资格而作为合并企业的一部分从事生产经营活动.合并后的企业除对所有被合并企业的原资产实行直接控制和管理外,还往往承担被合并企业的负债。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条