1) glazed hollow bead
玻化微珠
1.
Effect of Al(H_2PO_4)_3 on properties of glazed hollow bead insulation material;
Al(H_2PO_4)_3对玻化微珠保温材料性能的影响
2.
Thermal insulation glazed hollow bead concrete is explored for the first time;
玻化微珠保温混凝土初探
3.
Study on properties of thermal insulation glazed hollow bead concrete mixing with ore sand and tailing
掺加铁矿砂尾砂的玻化微珠保温混凝土的性能研究
2) vitrified microsphere
玻化微珠
1.
Experimental study on preparation technique of expanded vitrified microsphere heat insulation mortar;
膨胀玻化微珠保温砂浆配制技术试验研究
2.
Performance of thermal insulation paste blended with vitrified microsphere and EPS and its application to external wall thermal insulation;
双掺玻化微珠和EPS保温浆料的性能及其在外墙外保温中的应用
3.
Preparation and construction technology of phosphogypsum vitrified microsphere thermal insulation mortar;
磷石膏玻化微珠保温砂浆的配制与施工工艺
3) Vitrified micro bubbles
玻化微珠
1.
Research into construction technology of vitrified micro bubbles heat-insulation system;
玻化微珠保温系统施工技术研究
2.
In this paper,experimental study on the mixture of vitrified micro bubbles heat-insulation mortar was engaged to meeting with the target of lower thermal conductivity and higher strength.
为了进一步降低导热系数,进一步提高抗压强度,对膨胀玻化微珠保温砂浆配制技术进行了试验研究,试验结果表明通过优化配合比,复合掺入高效砂浆发泡剂和β半水石膏,可以在一定程度上改善膨胀玻化微珠保温砂浆性能,扩展其在工程上的应用。
4) expanded and vitrified small balls
膨胀玻化微珠
1.
The microstructure and sorption properties are studied on the expanded and vitrified small balls which are developed to decrease the sorption properties of the expanded perlite particles.
以膨胀珍珠岩为参照,研究了旨在减少膨胀珍珠岩吸水吸湿性而开发的膨胀玻化微珠的微观结构和吸湿性能。
5) glass bead
玻璃微珠
1.
Compressive properties and thermal stability of glass bead reinforced rigid polyurethane foams;
玻璃微珠增强硬质聚氨酯泡沫塑料的压缩性能及热稳定性
2.
Study on heat resistance of the modified bismaleimide composites filled with hollow glass beads;
空心玻璃微珠填充改性双马来酰胺树脂复合材料耐热性能的研究
3.
Effect of Surface Modification of Hollow Glass Bead on Property of Bismaleimide;
空心玻璃微珠表面改性对双马来酰亚胺树脂性能的影响
6) glass beads
玻璃微珠
1.
Analysis of glass beads retroreflective array film by ray tracing method;
玻璃微珠逆反射列阵膜的光路分析
2.
Composites of polyphenylene sulfide reinforced with two kinds of glass beads were prepared by compression molding.
2种不同粒径的空心玻璃微珠与聚苯硫醚树脂通过熔融共混挤出制得复合材料,研究了这2种玻璃微珠对聚苯硫醚树脂摩擦磨损性能的影响。
3.
Nickel ferrite coatings were prepared on the surface of glass beads using the polyacrylamide gel method.
采用高分子凝胶法在玻璃微珠表面制备了镍铁氧体包覆层。
补充资料：玻璃微珠
分子式：
CAS号：
性质：又称玻璃微珠。是直径几到几十微米的实心或空心的玻璃珠，有无色的和有色的。其制造方法有粉末法、熔融法和煅烧法三种。它的特性是：(1)光洁度好；(2)光的反射性好，具有定向反射性；(3)冲击强度高。其成分根据用途来确定。它可用于金属工件的研磨介质、喷丸及清洁处理、交通安全标志、化工填料、反射屏幕等。
CAS号：
性质：又称玻璃微珠。是直径几到几十微米的实心或空心的玻璃珠，有无色的和有色的。其制造方法有粉末法、熔融法和煅烧法三种。它的特性是：(1)光洁度好；(2)光的反射性好，具有定向反射性；(3)冲击强度高。其成分根据用途来确定。它可用于金属工件的研磨介质、喷丸及清洁处理、交通安全标志、化工填料、反射屏幕等。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条