1) iron-aluminum composited adsorbent
铁铝复合吸附剂
1.
Performance of phosphate removal by iron-aluminum composited adsorbent is studied under different crystallization temperature.
考察了不同晶化温度下制备的铁铝复合吸附剂去除PO_4~(3-)-P的性能以及pH值和共存干扰离子CO_3~(2-)对其吸附去除PO_4~(3-)-P性能的影响。
2.
Removal of trace phosphorus in water is investigated by iron-aluminum composited adsorbent.
考察了铁铝复合吸附剂去除水中痕量磷的效能,并采用粒度分析、Zeta电位测定及能谱分析等手段对其吸附除磷机理进行探讨。
2) compound adsorbent
复合吸附剂
1.
Performance of novel 13X zeolite based refrigerant compound adsorbent;
基于13X沸石的新型制冷复合吸附剂性能
2.
A multi-function heat pipe type adsorption ice maker, which uses activated carbon-CaCl2 as compound adsorbent and ammonia as refrigerant, was designed.
设计了一种基于多功能热管的高效吸附式制冰机组,采用氯化钙/活性炭复合吸附剂和氨作为吸附工质对。
3.
Different compound adsorbents thermal conductivities were measured at different adsorption capacities.
应用瞬时热探针法测试吸附制冷工质导热系数,在不同的吸附量下对配置出的复合吸附剂导热系数进行测试,并从中选出适用于太阳能冷管的复合吸附剂Z1和Z2。
3) Composite adsorbent
复合吸附剂
1.
Adsorption performance of composite adsorbent for adsorption refrigeration;
吸附制冷用复合吸附剂的吸附性能
2.
Adsorption isotherm estimation of composite adsorbents for adsorption refrigeration;
吸附制冷用复合吸附剂的吸附等温线推算
3.
Preparation and adsorption mechanism of composite adsorbents for adsorption refrigeration;
吸附制冷用复合吸附剂的制备
4) compound adsorbents
复合吸附剂
1.
Calculation of parameters on adsorption kinetics of carbon monoxide, carbon dioxide and methane on compound adsorbents with rare-earth elements;
CO、CO_2和CH_4在稀土复合吸附剂上吸附动力学参数计算
5) composite zeolite/foam aluminum
沸石分子筛/泡沫铝复合吸附剂
1.
A new composite zeolite/foam aluminum was proposed and prepared to enhance heat and mass transfer of zeolite.
本文提出了一种强化传热传质的沸石分子筛／泡沫铝复合吸附剂及其制备方法,用HotDisk热物性测量仪测量了其导热系数为2。
2.
On the basis of the Linear Driving Force non-equilibrium adsorption model,the perfor- mance of composite zeolite/foam aluminum-water adsorption refrigeration are calculated at different thicknesses and cycle time.
基于线性驱动力(LDF)非平衡吸附模型,计算了不同吸附层厚度、不同循环周期沸石分子筛/泡沫铝复合吸附剂-水的基本循环吸附制冷性能。
6) ferroaluminium composite coagulant
铝铁复合混凝剂
补充资料：硅酸铝纤维增强铝基复合材料
分子式：
CAS号：
性质：以铝合金为基体以硅酸铝短纤维增强的复合材料。硅酸铝短纤维包括非晶态硅酸铝纤维(45%～55%Al2O3，55%～45%SiO2)和晶态硅酸铝短纤维(72%～80%Al2O3，28%～20%SiO2)。采用挤压铸造或压力浸渍工艺制造硅酸铝短纤维增强铝合金复合材料。与基体铝合金相比，硅酸铝短纤维增强铝合金复合材料的高温拉伸强度提高30%，耐磨性提高3～5倍，硅酸铝短纤维增强铝合金复合材料还可应用到发动机一些耐热耐磨零件上。还可进行硅酸铝短纤维与短碳纤维或SiC颗粒混杂，能得到性能更优良的复合材料。
CAS号：
性质：以铝合金为基体以硅酸铝短纤维增强的复合材料。硅酸铝短纤维包括非晶态硅酸铝纤维(45%～55%Al2O3，55%～45%SiO2)和晶态硅酸铝短纤维(72%～80%Al2O3，28%～20%SiO2)。采用挤压铸造或压力浸渍工艺制造硅酸铝短纤维增强铝合金复合材料。与基体铝合金相比，硅酸铝短纤维增强铝合金复合材料的高温拉伸强度提高30%，耐磨性提高3～5倍，硅酸铝短纤维增强铝合金复合材料还可应用到发动机一些耐热耐磨零件上。还可进行硅酸铝短纤维与短碳纤维或SiC颗粒混杂，能得到性能更优良的复合材料。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条