1) friction interference
摩擦干扰
1.
In the paper,the method of photography has been applied to gather the original traffic data about the friction interference of bicycles on motor vehicles driving on the sections of typical road,and the proper.
针对自行车对机动车行驶的摩擦干扰,作者采用摄像法在典型路段对交通数据进行采集,经过数据转换、样本筛选和数据析取,提取出符合要求的干扰数据。
2.
In this paper,an approach using adaptive fuzzy compensator is proposed to overcome friction interference in steadyspeed control system of gratingdisctesttable.
在惯导测试设备设计过程中会经常碰到摩擦干扰问题。
2) Reaction wheel inner friction
内摩擦干扰
3) friction torque compensatation control
摩擦转矩干扰补偿
4) friction disturbance
摩擦扰动
1.
Then we consider how to reduce the friction disturbance from two aspects.
分析了摩擦对机器人运动的扰动,讨论了降低摩擦扰动的措施,接着又分析了低速运行时产生的突跳现象对六足机器人的影响。
2.
To reduce friction disturbance in the servo control system of gyro stabilized platforms,a grey sliding mode controller is designed.
为了减小摩擦扰动对陀螺稳定平台伺服跟踪性能的影响,设计了一种灰色滑模控制器。
5) dry sliding
干摩擦
1.
Friction and wear properties of surface nanocrystallization of medium carbon steel were studied in dry sliding by a ring-on-disc tester.
采用高能喷丸方法对45#钢进行表面纳米化处理,在环-盘摩擦磨损试验机上评价表面纳米化处理45#钢与T10钢摩擦副在干摩擦条件下的摩擦磨损试验,通过分析其磨损表面形貌探讨表面纳米化对中碳钢磨损行为的影响。
2.
The effects of matrix modification of resin matrix friction materials on friction and wear of friction couple,which was composed of resin matrix friction materials and aluminum matrix composites were studied under dry sliding.
研究了树脂基摩阻材料的基体共混改性对树脂基摩阻材料/喷射沉积铝基复合材料摩擦副在干摩擦状态下摩擦磨损性能的影响,着重探讨了腰果壳油改性酚醛树脂与丁腈橡胶(NBR)的比例对摩擦副的影响,在此基础上制备出了用于1∶1台架制动试验的树脂基闸片。
3.
By using 3 D surface topographical measurement,the topographical features of dry sliding surface of compacted graphite cast irons(C G irons) were investigated.
运用三维表面形貌测试技术 ,分析了蠕墨铸铁的干摩擦表面接触形貌特征 ,并从传热学的角度分析了摩擦表面形貌特征与其干摩擦学特性的关系 。
6) Dry friction
干摩擦
1.
Effect of CaCO_3 whisker and PTFE on dry friction behavior of PEEK;
CaCO_3晶须和PTFE对PEEK干摩擦性能的影响
2.
Progress in Study of Dry Friction and Wear of PPS Composites;
PPS复合材料干摩擦磨损性能研究进展
3.
Investigation on the computational method of vibration response of dry friction system with cubic nonlinearity for metal rubber;
金属橡胶三次非线性干摩擦系统振动响应计算方法研究
补充资料：摩擦学:滚动摩擦
滚动摩擦
两相互接触的物体有相对滚动或有相对滚动趋势时的摩擦。滚动摩擦的机理不同於滑动摩擦﹐它主要来源於滚动体在接触区域產生弹-塑性变形﹐在以接触点(或线)为中心的接触区内接触压力分布不对称﹐致使支承面的反力N 发生偏心﹐并產生摩擦力F (见图 滚动摩擦示意图
)。用表示法向反力N 到接触点的距离﹐根据力的平衡条件可得
式中为滚动体半径﹔为滚动摩擦係数﹐它的量纲为长度﹐其值与接触面的材料﹑粗糙度﹑温度和湿度等因素有关。
两相互接触的物体有相对滚动或有相对滚动趋势时的摩擦。滚动摩擦的机理不同於滑动摩擦﹐它主要来源於滚动体在接触区域產生弹-塑性变形﹐在以接触点(或线)为中心的接触区内接触压力分布不对称﹐致使支承面的反力N 发生偏心﹐并產生摩擦力F (见图 滚动摩擦示意图
)。用表示法向反力N 到接触点的距离﹐根据力的平衡条件可得 式中为滚动体半径﹔为滚动摩擦係数﹐它的量纲为长度﹐其值与接触面的材料﹑粗糙度﹑温度和湿度等因素有关。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条