1) process assignment
工艺分工
1.
Process modeling for product process assignment planning of space product development;
型号研制过程的工艺分工规划建模技术研究
2.
Research on process assignment planning oriented to networked manufacturing;
面向网络化制造的工艺分工规划技术研究
3.
In order to construct a process assignment and planning system quickly according to the situation of an enterprise,a method for process assignment based on PDM(Product Data Management) is presented.
为了在企业广泛应用PDM系统条件下,快速构建工艺分工规划系统,提出了一种基于PDM系统的工艺分工规划设计与管理解决办法。
2) process analysis
工艺分析
1.
Application of cutting tool and process analysis based on NC hole-machining;
基于数控机床孔加工的刀具应用及工艺分析
2.
Cooling Process Analysis of the Stainless Steel High-speed Grinding
不锈钢高速磨削加工冷却工艺分析
3) dispersing process
分散工艺
1.
The dispersing process was optimized and the effect of ethylene glycol on carbon black dispersing was investigated by orthogonal tests.
采用正交试验,优化了水性炭黑色浆的分散工艺,考察了乙二醇对炭黑分散的影响。
4) technological analysis
工艺分析
1.
A feasible process scheme was made for forming the steering knuckle of a truck based on a technological analysis on the forging of the part.
通过对卡车转向节锻件的工艺分析,制定了合理的工艺方案。
2.
This paper,aiming at the structural features of the turbine blades (hereinafter referred to as "blades" for short) and in combination of the technological characteristics of the abrasive belt grinding,conducts a technological analysis of the abrasive belt grinding for the turbine blades.
针对汽轮机叶片的结构特点,结合砂带磨削的工艺特性,进行了叶片砂带磨削的工艺分析。
3.
Through the technological analysis of a part of a computer case, the mold structure of athree-plate injection mold is introduced.
通过对某种电脑机箱零件的工艺分析,介绍了一种三板式注射模具的模具结构,并且详细介绍了该模具在设计过程中的要点及工作原理,尤其是侧抽芯机构中“干涉”现象的产生及处理方法,三板式注射模具的三次分型过程,对分析其它有倒钩的采用针点浇口的三板式注射模具的设计有一定的参考价值。
5) technology analysis
工艺分析
1.
Introduced the pressing technology analysis,the carrier choosing,layout designing and structure design of the progressive die for the swinging connecting rod.
介绍了摆动连杆的冲压工艺分析过程、载体的合理选择、带料排样方案的确定及级进模模具的总装结构设计。
2.
By technology analysis of connect plate structure character, the progressive die layout project of punching parts as well as the structural design of main die parts and general die assembling are determined.
通过对连接板结构特点的工艺分析,确定冲件级进模排样方案的选择和模具主要工作件及模具总装结构设计。
3.
By the technology analysis of the parts,the paper improves the technical scheme.
通过对零件的工艺分析,改进了工艺方案,用一套复合模完成落料冲孔工序,阐述了异形垫圈冲裁复合模具的整体结构特点及工作过程,应注意的问题和装配工艺性。
6) technical analysis
工艺分析
1.
Through the technical analysis of steel drawer panel,the technical solution is changed.
通过对钢质抽屉面的工艺分析,改变了工艺方案,充分利用设备特点,设计出一套应用于普通压力机上的多工位弯曲成形模具。
2.
Integrating cabinets' features into technical analysis,some typical parameter programme modules are developed for cabinets processing.
介绍基于NUM数控系统的数控机床,应用参数编程方法解决在不具有CAM软件编程的企业中,通过对采煤机箱体加工的工艺分析,应用开发其数控系统自身具有的参数编程功能,结合箱体结构的特点,建立加工箱体的几种典型的参数编程模块,作为调用子程序。
3.
Through the technical analysis of hole punching on circular duct,the characteristic in deˉsigning die for hole punching on circular duct was described.
通过对圆管冲孔的工艺分析,阐述了圆管冲孔模具设计特点,针对具体零件,设计了1副无凹模对冲模具,降低了生产成本,提高了产品质量和生产效率,为类似管材零件的冲孔加工提供参考。
补充资料：采气工艺(见天然气开采工艺)
采气工艺(见天然气开采工艺)
gas production technology
，一‘J\匕乙吕天然气开采工艺pro以uetionteehnology)见
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条