1) shipborne
[英]['ʃipbɔ:n] [美]['ʃɪp,bɔrn, -,born]
舰载
1.
Aiming at the composition of shipborne UAV system and the main problems in its embarkment on ships,this paper analyzed and proposed the model selection requirements on the three subsystems(aerocraft,task equipment and ship surface system) of the shipborne UAV system,and brought forward suggestions on development thoughts of shipborne UAV system.
针对舰载无人机系统的组成以及上舰存在的主要问题等进行分析,提出舰载无人机系统三个子系统(飞行器、任务设备、舰面系统)的选型要求,对舰载无人机系统的发展思路提出建议。
2.
Because of the restrict of the traditional network management system, this article brings forward a new shipborne network management system based on web.
基于传统的网络管理的局限性,提出了一种新的基于Web的舰载网络管理系统,描述了它的体系结构及其实现技术,并阐述了主要功能模块的功能及其实现方式。
2) shipboard
[英]['ʃɪpbɔ:d] [美]['ʃɪp'bɔrd]
舰载
1.
The process of development of the equipment of the electro-optic confrontation in the shipboard and equipments in all countries over the world and its modification are described.
介绍舰载光电对抗装备的发展历程以及装备的研制、改进情况,指出在现代战争中发展舰载光电对抗装备的优势和重要性,重点探讨几种舰载舰载光电对抗装备的性能及其特点,论述了舰载舰载光电对抗装备的发展分析。
2.
The process of development of the electronic warfare and anti-missile weapons in the shipboard and equipments in all countries over the world and its modification are described.
通过舰载电子战与反导武器的有机配合,就能使反舰导弹造成的损失降到最低限度。
3.
for a high performance shipboard radome which was designed and produced difficultly to meet the electromagnetic performance,the structural performance and good cost-effective by traditional design and materials.
通过常规基体、增强材料和芯材等主要原材料之间的优化复合设计,开展单板、三夹层结构和五夹层结构各形式复合材料之间的制作、电性测试与分析,优化设计出了一种新型兼顾电性、力学性能的功能型五夹层结构复合材料,满足了高性能舰载雷达宽频带、高透波等电性指标要求,同时还满足了其高比强、刚度的力学指标要求,解决了传统型设计和材料通常无法满足其电性能、强刚度、低成本制作的矛盾。
3) carrier landing approach
舰载机进舰
1.
Variable strategy pilot model of carrier landing approach;
舰载机进舰任务中的驾驶员变策略控制模型
4) Carrier aircraft landing
舰载机着舰
1.
Carrier aircraft landing is the key technology of modern carrier/carrier aircraft system, and the carrier aircraft landing simulation system provides an effective approach for carrier aircraft automatic guidance and control research.
舰载飞机着舰是现代航空母舰/舰载飞机系统的关键技术,而舰载飞机着舰仿真系统为研究舰载机着舰自动导引和控制提供了有效的途径。
5) carrier plane groups
舰载机群
1.
Evaluating the damage efficiency of the carrier plane groups under the attacking of multiple-submunition is a complicated problem.
对于采用子母弹攻击航空母舰舰载机群的毁伤效果分析问题,存在相当大的难度,为对子母弹攻击舰载机群毁伤评估提供一个快速、初步的结果,在对舰载机群进行易损性分析的基础上,采用像素仿真的模拟方法,实现了多弹攻击下舰载机群毁伤效果的计算机模拟计算。
6) carrier-based aircraft
舰载机
1.
Primary study on command & control system for aerial combat of carrier-based aircrafts;
航母舰载机战斗群航空作战指挥控制系统初步研究
2.
Optimization on fast-extension performance of nose landing gear of carrier-based aircraft
舰载机前起落架突伸性能优化
3.
The Research on Influence of Sway on Precision and Time of Transfer Alignment of Carrier-based Aircraft's INS
摇摆运动对舰载机惯导系统传递对准精度和时间的影响的研究
补充资料:“巴拉克-1”舰载点防御系统
Image:1160289369287930.jpg
“巴拉克-1”舰载点防御系统
“巴拉克-1”舰载点防御系统是海军专用防御系统,是以色列航空工业公司和拉斐尔武器发展局共同投资发展的,用于对抗亚声速和超声速的反舰威胁,包括飞机、反舰导弹、无人机等。
“巴拉克-1”采用标准组件,集装箱式垂直发射装置安装在舰船的专用舱中,可快速地与新导弹一起再补足,维持战斗准备就绪状态。1套典型系统配置8枚导弹,导弹采用雷达指令制导。由于系统建有战术图像和威胁评估数据库,因此可对威胁做出迅速响应。2004年初印度向以色列采购了价值5800万美元的“巴拉克”系统,以增强海军水面舰艇的防空能力。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。