1) on-board
机载PHM
1.
Considering technique characteristics and maintenance demand of the new generation operational aircraft,three different backup blue prints of on-board prognostics and health management system architectures are contrasted,and then a layered architecture is presented,which include vehicle leve.
针对新一代作战飞机的技术特点以及在维修保障方面的需求,对机载PHM系统体系结构的3种备选方案进行了对比分析,提出了一种由模块/单元层PHM、子系统级PHM、区域级PHM和平台级PHM等4层集成的层次化体系结构,并着重从层次的划分、组成要素的功能描述、信息传输和外部逻辑等几个方面进行了论述。
2) Airborne
机载
1.
Remote Sensing of Atmospheric Trace Gas by Airborne Passive FTIR;
机载FTIR被动遥测大气痕量气体
2.
Design of Emitting Optical System for Airborne Photoelectric Tracking;
机载光电跟踪发射光学系统设计
3.
Structural Design of Airborne Radar Transmitter under the Condition of Non Environment Control Cooling System;
无环控冷却条件下的机载雷达发射机结构设计
3) organic carrier
有机载体
1.
Development of organic carrier for PDP phosphor paste;
PDP荧光粉浆料用有机载体的研制
2.
A comment was carried out on characters of metallocene catalyst with organic carrier, the approaches for supporting as well as the influences of supporting on capability of the catalyst in olefin polymerization and properties of the polymers.
综述了近年来天然高分子、聚合物等有机载体用于负载茂金属催化剂的研究现状,评述了有机载体型茂金属催化剂的特点、负载方式、负载化对催化烯烃聚合性能和聚合物性能的影响。
3.
The influence of the three components (function phase, organic carrier, glass phase) of high sintering temperature silver paste upon its quality was discussed in this paper.
讨论高温银浆的功能相、有机载体和玻璃相三大组成部分对高温银浆品质的影响 ,得到了一些对高温银浆的开发、研制有益的结论。
4) inorganic carrier
无机载体
1.
Some typical inorganic carriers were used to support PCC and PDC as oxidants,the activity of the supported oxidants was evaluated in the selective oxidation reaction of 1,4-butanediol to 4-hydroxybutanal.
制备得到各种有代表性的氯铬酸吡啶(PCC)和氯重铬酸吡啶(PDC)无机载体氧化试剂,控制各载体氧化剂中氧化剂的负载量PCC为1。
2.
Some typical inorganic carriers were used to support PCC as oxidants,the activity of the supported PCC was evaluated in the selective oxidation reaction of benzyl alcohol to benzaldehyde.
制备得到各种有代表性的氯铬酸吡啶(PCC)无机载体氧化试剂,以苯甲醇选择性氧化成苯甲醛为探针反应,考察了载体、反应条件对氧化反应效率的影响,控制各载体氧化剂中PCC的负载量均为1。
5) stochastic loads
随机载荷
1.
For this purpose,several assumption are pre-determined, including a close relationship between the average and stochastic loadsof a single pick.
截齿的载荷是确定连续采煤机截割工况和研究其截割性能的依据,根据对连续采煤机截割滚筒结构特殊性和工作条件复杂性的分析,通过假设单个截齿平均载荷与随机载荷的关系、截齿的受力分布类型以及硬质包裹体的接触概率,利用叠加原理,建立了在复杂煤层截割时,连续采煤机上处于截割断面不同位置的截齿的随机载荷的数学模型。
2.
On the foundation of the theory which is about the single pick's average load, analyzed loads's probability distribution and relevance when a single pick cuts various coal rock, on this basis, Utilizing the stochastic process theory ,set up the mathematical model about the single pick's stochastic loads.
本文在单齿平均载荷理论的基础上，分析了单齿截割各种煤岩时载荷的概率分布和相关性，在此基础上，利用随机过程理论，建立了单齿随机载荷的数学模型。
6) Random Load
随机载荷
1.
Simulation study of random loads on a cutting head of roadheader;
掘进机截割头随机载荷的模拟研究
2.
Statistics analysis and simulation of random loads for bridges;
桥梁随机载荷数据采集和数值模拟
3.
Model to realize the remote parameter control of random load;
随机载荷的远程参数控制实现的模型
参考词条
补充资料：机载气象雷达(见机载航行雷达)
机载气象雷达(见机载航行雷达)
airborne weather radar
liZai qiXIQng Ieida机载气象雷达(ai rbom。weather radar)见机载航行雷达。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。