1) supporting conditions
支撑条件
1.
On Old-age Security System in Rural Areas and Its Supporting Conditions——Based on an Investigation in the Rural Areas,Shanxi;
农村养老保障现状及其支撑条件——对山西农村调查资料的分析
2.
Through analyzing meaning and controlling dimension of flexibility and flexibility management,it is advanced that flexibility of superintended ability,flexibility of organization essential factors and flexibility of key ability in high-technology enterprise are essential supporting conditions of realizing dynamic strategic management model.
通过对柔性的一般涵义、控制维度和柔性管理的分析,提出了高技术企业管理者能力柔性、组织构成要素柔性和核心能力柔性等是实现其战略管理模式动态化的必要支撑条件。
3.
Based on the analysis of the conception of economy of scale in the third-party logistics,this paper makes a deep research on the internal and external supporting conditions of the economies of scale in the third-party logistics.
本文在分析了第三方物流的规模经济含义的基础上,深入探讨了第三方物流规模经济的内外部支撑条件,认为内部支撑条件包括生产技术、资本和管理组织能力,外部支撑条件包括市场需求规模、市场范围和市场交易效率。
2) support condition
支撑条件
1.
The wheel-rail contact was directly effected by vibration shape of rail,and rail vibration was largely effected by different support condition.
钢轨的振动形态直接影响着铁路轮轨的接触状态,不同的支撑条件对钢轨的振动有着较大的影响。
2.
This paper presents a new optimization method for structural support condition based on GAS.
提出了一种将结构支撑位置和支撑类型作为设计变量的优化设计方法 ,就支撑条件改变对结构受力的影响进行了分析 ,论述了如何在遗传算法中实现结构支撑位置和支撑类型的优化 。
3.
Based on the example of a large and single layer net hull,compared the distortion,strength and temperature stress of vary seat form conditon,analyzed single layer net hull support condition and the flexibility seat optimize design on different load and get an opposite and more excellent design project.
以某大型单层网壳结构为例,比较了各种支座形式下的结构变形、强度和温度应力,初步探讨了在诸多荷载组合工况中单层网壳结构支撑条件的设计和弹性支座的优化设计,最后得出了相对更优的方案。
4) backstay
[英]['bæk,stei] [美]['bæk,ste]
支撑,撑条
5) supporting measures and conditions
保障措施和支撑条件
6) stay
[英][steɪ] [美][ste]
支柱撑条
补充资料:多孔陶瓷支撑体膜
分子式:
CAS号:
性质:在多孔陶瓷体上附着的微孔陶瓷膜层。膜层厚度一般在几微米到几十微米,外径孔径一般为0.1~0.5μm,个别也有厚度达3~5μm、孔径10μm的。多采用氧化铝、二氧化钛和二氧化锆等作膜材料。制法是:用电机带动陶瓷支撑体旋转,当溶胶液(膜材料)滴落在支撑体上,就会迅速地敷覆到支撑体表面,待溶剂蒸发、凝胶化和干燥成膜后,经热处理而制成氧化物薄膜。现已为食品(含饮料)、医药、生物技术和环境保护等领域开发利用。
CAS号:
性质:在多孔陶瓷体上附着的微孔陶瓷膜层。膜层厚度一般在几微米到几十微米,外径孔径一般为0.1~0.5μm,个别也有厚度达3~5μm、孔径10μm的。多采用氧化铝、二氧化钛和二氧化锆等作膜材料。制法是:用电机带动陶瓷支撑体旋转,当溶胶液(膜材料)滴落在支撑体上,就会迅速地敷覆到支撑体表面,待溶剂蒸发、凝胶化和干燥成膜后,经热处理而制成氧化物薄膜。现已为食品(含饮料)、医药、生物技术和环境保护等领域开发利用。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条