1)  chlorine alkali factory
氯碱厂
1.
In order to study the distributions characteristics of PCBs,OCPs and PAHs in PM_(10) in chlorine alkali factory in a typical chemical industry zone in Shanghai,the samples of PM_(10) around the factory were collected with the great flux sampling instrument every two months for one year.
为了研究上海市某工业区氯碱厂可吸入颗粒物(PM10)中多氯联苯(PCBs)、有机氯农药(OCPs)和多环芳烃(PAHs)污染特征及其来源,应用大流量采样器,每2个月采取其周边大气PM10,连续采样1年,参照美国EPA系列方法进行分析。
2)  chlor-alkali
氯碱
1.
Development measures of chlor-alkali industry under the macro-control policies of our country;
国家宏观调控政策下氯碱行业的发展措施
2.
Recovery and utilization of by product hydrogen in chlor-alkali production;
氯碱生产副产氢气的回收与利用
3.
The worldwide chlor-alkali industry and market trend(to the end);
世界氯碱产业与市场动向(续完)
3)  chlor-alkali production
氯碱生产
1.
Several special pumps for chlor-alkali production;
氯碱生产用几种特殊的泵
2.
Brief introduction of zero discharge of wastewater in chlor-alkali production;
浅谈氯碱生产中的废水“零排放”
3.
Establishment of control monitor system of nitrogen trichloride in chlor-alkali production;
氯碱生产应建立三氯化氮监控体系
4)  Chlor-alkali Industry
氯碱工业
1.
Analysis of Mercury Pollution in Chlor-alkali Industry;
氯碱工业汞污染问题分析
2.
Application of new screw-type air compressors with air cooling in chlor-alkali industry;
新型风冷型螺杆式空气压缩机在氯碱工业中的应用
3.
Development features of domestic chlor-alkali industry and development ideas of "Eleventh Five-Year Plan" of Jiangsu Chlor-alkali Industry Association;
我国氯碱工业发展特点及江苏省氯碱工业“十一五”发展思路
5)  chlor-alkali industry
氯碱行业
1.
Electrical technology for power consumption reduction in chlor-alkali industry;
降低氯碱行业电耗的电气技术
2.
Study of environmental risk assessment of chlor-alkali industry;
氯碱行业环境风险评价方法初探
3.
The development status of chlor-alkali industry in recent years was introduced.
介绍了我国氯碱行业近几年来的发展情况;分析了我国烧碱生产的工艺技术现状。
6)  chlor-alkali enterprises
氯碱企业
1.
Influential factors of environment of chlor-alkali enterprises and preventive measures;
氯碱企业环境影响因素及防范措施
2.
Inspection and maintenance on rectification devices of chlor-alkali enterprises;
氯碱企业整流设备的检查和维护
3.
And the stations of combining heat and power generation technology for chlor-alkali enterprises were analysed.
分析了氯碱企业应用热电冷联产技术的条件。
参考词条
补充资料:氯碱厂
      用电解饱和食盐水溶液的方法联产氯气和烧碱的化工厂。每生产烧碱1t,联产氯气880kg和氢气25kg。氯碱厂的产品中氯气有剧毒,氢气易燃、易爆,盐酸、烧碱腐蚀性极强。因此,工厂对防火、防爆、防毒和防腐蚀有特殊和严格的要求,并要注意环境保护。氯碱工厂的建设常选择在居民生活区的下风侧,厂内也将有毒害和有腐蚀性的车间置于工厂的下风侧。工厂还宜选择在热、电量供应充足而价廉,且接近产品消费市场的地方建设。
  
  氯碱厂的生产,主要受烧碱和氯气的产销平衡的影响。至20世纪80年代,还有不少国家的氯碱厂是以烧碱为主产品,氢气和氯产品为副产品,但烧碱的用量大于氢气和氯产品用量,由于氯气过剩,限制了烧碱的生产。而工业发达国家的氯碱厂,着重发展有机氯产品,其耗氯量占总耗氯量的60%~70%,氯产品的品种多达250余种,氯加工能力大于烧碱生产能力,保证了工厂的正常生产。1983年,中国主要氯碱厂有机氯产品的耗氯量占总耗氯量的42.45%(表1)。
  
  中国第一个氯碱厂是天原电化厂,建于1929年。1985年,全国共有氯碱厂180多个,其中,烧碱年生产能力50kt以上的有八个(表2),占总生产能力的32.4%;20~50kt的20个,占30%;7.5~20kt的35个,占20%;小于7.5kt的120多个,占总生产能力的17.6%。烧碱年生产能力超过 100kt的大厂是上海电化厂、天津化工厂、上海天原化工厂和大沽化工厂。(见氯碱工业)
  

说明:补充资料仅用于学习参考,请勿用于其它任何用途。