1) Cellular Aluminum
多孔泡沫铝
1.
Preparation of Cellular Aluminum with Soluble Plaster Mould Investment Casting Process;
可溶石膏型熔模精铸工艺制备多孔泡沫铝
2) open-cell aluminum foam
开孔泡沫铝
1.
Effects of porosity and pore size on the electrical conductivity of open-cell aluminum foams;
孔隙率及孔径对开孔泡沫铝导电性的影响
2.
The open-cell aluminum foams have been produced by pressure infiltrating process.
采用加压渗流法制备不同特征参数的开孔泡沫铝,在50~1050MHz电磁波频率内研究了开孔泡沫铝的屏蔽特性,并探讨了泡沫铝的孔径和厚度对其电磁屏蔽性能的影响。
3.
The open-cell aluminum foams have been produced by pressure infiltrating process,and the structural parameters such as cell size and porosity of the aluminum foams were controlled by adjusting process parameter.
采用“直流四端电极”法测量了不同参数泡沫铝的电阻,研究开孔泡沫铝的导电性随其相对密度和孔径的变化规律。
3) closed-cell aluminum foam
闭孔泡沫铝
1.
Dynamic compressive property of closed-cell aluminum foam with Al matrix and Al-6Si matrix;
Al基和Al-6Si基闭孔泡沫铝的动态压缩性能
2.
Electromagnetic shielding effectiveness of Al-Si closed-cell aluminum foam;
Al-Si闭孔泡沫铝电磁屏蔽效能
3.
Experimental study on cellular structure statistical analysis and uniaxial deformation behavior of closed-cell aluminum foam
闭孔泡沫铝特征统计及其变形行为实验研究
4) closed cell aluminum foam
闭孔泡沫铝
1.
Effect of foaming parameters on cell structure of a closed cell aluminum foam;
发泡工艺参数对闭孔泡沫铝胞结构的影响
2.
Aiming at structure and property control, a closed cell aluminum foam with the same composition but different cell structures was prepared by air-foaming process.
本论文采用压缩空气铝熔体发泡法，制备了具有相同成分、不同胞结构的闭孔泡沫铝，并通过改变工艺参数控制胞结构和组织特性。
5) closed-cell aluminum alloy foam
闭孔泡沫铝
1.
Electromagnetic shielding effectiveness of closed-cell aluminum alloy foams;
闭孔泡沫铝的电磁屏蔽性能
6) Al-Si closed-cell aluminum foam
铝硅闭孔泡沫铝
1.
Research on sound absorption property of Al-Si closed-cell aluminum foam;
铝硅闭孔泡沫铝吸声性能研究
补充资料：开孔泡沫塑料
分子式：
CAS号：
性质：泡沫塑料中的几乎全部泡孔都呈开放式网球状，泡孔之间和泡孔与外界间互相连通，泡孔中的流动相(气体或液体)呈连续相。具有一般泡沫塑料特性，导热性和吸水性比闭孔泡沫塑料强。可用于隔音、减震、过滤、室内装饰、服装和日用材料等。
CAS号：
性质：泡沫塑料中的几乎全部泡孔都呈开放式网球状，泡孔之间和泡孔与外界间互相连通，泡孔中的流动相(气体或液体)呈连续相。具有一般泡沫塑料特性，导热性和吸水性比闭孔泡沫塑料强。可用于隔音、减震、过滤、室内装饰、服装和日用材料等。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条