1) Heat leak
热漏
1.
Finite time thermodynamics of real combined power cycle operating between internal combustion engine and Stirling engine with heat leak;
存在热漏的内燃机与斯特林联合循环的有限时间的热力学研究
2.
Influence of different heat leak on power versus efficiency characteristics of heat engines;
不同热漏对热机功率效率特性的影响
3.
Cooling Load Density Optimization of Irreversible Air Refrigeration Cycles With the loss of heat leak;
考虑热漏损失的实际空气制冷机制冷率密度优化
2) Heat leakage
热漏
1.
Through the use of an irreversible Carnot heat engine model of Dulong Petit nonlinear heat transfer rate and heat leakage derived is its basic optimization relation with the issue of the heat engine efficiency during its maximum output power being also discusse
采用包括Ｄｕｌｏｎｇ－Ｐｅｔｉｔ非线性传热率和热漏的不可逆卡诺热机模型，导出其基本优化关系，并讨论了热机在最大输出功率时的效率问题。
2.
The performance for a class of generalized irreversible universal steady flow heat engine cycle model consisting of two heating branches,two cooling branches and two adiabatic branches with the losses of heat-resistance,heat leakage and internal irreversibility was analyzed and optimized using finite time thermodynamics.
用有限时间热力学方法分析了热漏、热阻和其他不可逆效应对工作在两恒温热源之间的普适定常流不可逆热机循环性能的影响,导出了由两个绝热过程、两个等热容加热过程以及两个等热容放热过程组成的循环的功率、效率和利润率的特性关系,并由数值计算分析了循环过程对循环性能的影响特点。
3) heat leakage
漏热
1.
Heat leakage influences the non-loss storage of cryogenic liquids directly,so to calculate the quantity of heat leakage accurately is a very important to improve the design of cryogenic vessels.
漏热会对低温液体的无损储运产生直接影响,准确测算低温容器的漏热量对改进低温容器的设计有着重要的实用价值。
2.
Several control methods which could avoid heat leakage were made by reasonable design of whole support structure of the cryogenic liquid storage vessel.
通过合理设计整体支撑结构,对造成漏热的几条主要途径加以控制。
3.
The heat leakage of an indirect cool refrigerator s cabinet has been studied.
讨论了间冷冰箱箱体的漏热问题 ,提出了改进方案。
4) heat leak
漏热
1.
The objective is to minimize their resulting heat leaking into HTS AC magnet.
通过研究交流超导磁体气冷电流引线两段式模型的优化设计,使得其向低温系统的漏热达到最小,并自行设计热测法实验装置进行了实验研究。
2.
In order to guarantee the good quality of transfer lines,the numerical thermal simulation of the supports of cryogenic transfer lines were made by FEA package ANSYS by which the heat leak and temperature distribution on the supports of transfer lines were obtained.
为了确保BEPCⅡ低温传输管线的设计质量,运用有限元软件包ANSYS对低温传输管线的支撑进行了热负荷的数值模拟,得到传输管线的漏热和支撑温度分布。
3.
The relation of all the heat leak factors is determined The result shows that the heat leak along the radial direction is much more than that along the axial direction.
对磁制冷中的关键部件主动式磁蓄冷器 (AMR)的漏热进行了数值计算 ,得到了漏热的组成关系 ,发现沿径向的热传导影响最大。
5) Heat loss
漏热
1.
The heat loss is a significant factor which influences the performance of a puls e tube cryocooler.
漏热冷损是影响低温制冷机性能的一个重要因素。
2.
Current lead is an important part of a cryogenic device, and it is also one of the main sources of heat loss of the system.
励磁电流引线是超导装置的重要组成部分，其漏热量往往占低温容器总漏热量的主要部分，是决定系统运行成本的重要因素。
6) Leakage heat
漏热
1.
A series of technology problems,such as struction of valve,choice of insulation form,choice of material,sealing,leakage heat,testing,which should be noticed in design,are discussed and analyzed.
针对低温(液氢、液氧)截止阀设计时应该注意的阀门结构,绝热形式的选择,材料选用,密封,漏热,试验等一系列技术问题进行了说明,为初学阀门设计者提供一些参考。
补充资料：热漏
热漏 热漏 病名。指漏症合并有明显下血者。出《外科启玄》卷七。即血漏。证治可参见血漏条。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条