1) wind turbine
![点击朗读](/dictall/images/read.gif)
风力机
1.
A summary on the stability problems of pneumatic-elasticity of wind turbine;
![点击朗读](/dictall/images/read.gif)
风力机气动弹性稳定性问题综述
2.
Numerical simulation on aerodynamic performance of an airfoil for wind turbine;
![点击朗读](/dictall/images/read.gif)
风力机叶片翼型气动特性数值模拟
3.
Effect of wind shear on wind turbine power;
![点击朗读](/dictall/images/read.gif)
风切变对风力机功率的影响
2) HAWT
![点击朗读](/dictall/images/read.gif)
风力机
1.
Research on the Dynamic Simulation of Typical Controlled Process of HAWT and Software Development;
风力机典型受控过程的动态仿真模拟研究及其CAD软件开发
2.
Researches on Wind Field Models and Extreme Loads Prediction Models of HAWT CAD Software;
![点击朗读](/dictall/images/read.gif)
水平轴风力机CAD软件中风场模型及极限载荷预测方法研究
3.
Research on the Transient Aerodynamic Problem of HAWT and Software Integration;
![点击朗读](/dictall/images/read.gif)
水平轴风力机动态气动问题研究及软件开发
3) wind turbines
![点击朗读](/dictall/images/read.gif)
风力机
1.
This paper presents aerodynamic design,structural design,materials and manufacturing technology of large composite blades for wind turbines.
本文介绍了大型风力机复合材料叶片技术现状,叙述叶片气动、结构、工艺等关键技术。
4) savonius rotor
![点击朗读](/dictall/images/read.gif)
Savonius风力机
1.
The overlap ratio(OL) is an important factor affecting the performance of Savonius rotor.
![点击朗读](/dictall/images/read.gif)
5)的Savonius风力机进行了风洞实验,确认了OL=0。
5) excitation of fans
![点击朗读](/dictall/images/read.gif)
风机扰力
1.
To study vibration responses of the structure under the excitation of fans, a 1/8 scale model is constructed and tested.
为了研究空冷凝汽器支架结构在风机扰力作用下的振动响应,制作了1/8比例模型进行试验研究。
2.
Employing 1/4 substructure, imitating the boundary condition, a 1/8 scale model was constructed and tested to study its mechanical behavior under excitation of fans and earthquake action.
取1/4子结构,模拟边界条件,按1:8缩尺比例制作模型进行风机扰力和地震作用下的试验研究。
6) Wind turbine
![点击朗读](/dictall/images/read.gif)
风力机组
1.
Method study on reliability improvement of wind turbine
![点击朗读](/dictall/images/read.gif)
提高风力机组可靠性方法研究
补充资料:风力机
风力机 wind machine 将风能转换为机械功的动力机械。又称风车。广义地说,它是一种以太阳为热源,以大气为工作介质的热能利用发动机。现代风力机的有效输出功WA=0.155ρD2v3,式中ρ为空气密度,D为风轮直径,v为空气速度。风车最早出现在波斯,起初是立轴翼板式风车,后又发明了水平轴风车。中国利用风车的历史至少不晚于13世纪中叶,曾建造了各种形式的简易风车用于碾米磨面、提水灌溉和制盐。风车传入欧洲后,15世纪得到了广泛应用。18世纪末期以后,随着工业技术的发展,风车的结构和性能都有了提高,已能采用手控和机械式自控机构改变叶片桨距来调节风轮转速。风力机用于发电的设想始于1890年丹麦的一项风力发电计划。1918年,丹麦已拥有风力发电机120台。第一次世界大战后,出现了现代高速风力机。1931年,苏联采用螺旋桨式叶片建造了一台大型风力发电机。随后,各国相继建造了一大批大型风力发电机。近代机电动力的广泛应用以及20世纪50年代中东油田的发现,使风力机的发展缓慢下来。20世纪70年代以后,由于能源紧缺,风能作为可再生的、无污染的自然能源又重新引起了人们的重视。
风力机主要由风能接收装置、控制机构、传动和支承部件等组成。风力机大都按风能接收装置的结构形式和空间布置,可分为水平轴结构和垂直轴结构两类。以风轮作为风能接收装置的常规风力机,按风轮转轴相对于气流方向的布置分为水平轴风轮式(转轴平行于气流方向)、侧风水平轴风轮式(转轴平行于地面、垂直于气流方向)和垂直轴风轮式(转轴同时垂直于地面风力机水平轴结构和气流方向)。 |
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条