1) combustion time parameters
燃烧时间参数
2) Combustion parameter
燃烧参数
1.
Combustion parameters were studied from a turbocharged inter-cooled diesel engine under constant speed and increasing torque(CSIT)operating conditions with combustion analyzer.
为了研究车用增压柴油机瞬态工况下燃烧参数的变化规律,利用燃烧分析仪在试验台上研究了恒转速变转矩瞬态工况下,油门开度变化率对燃烧参数的影响规律。
2.
Based on experience gained in designing and operation, the paper presents a short description of operational adjustment of principal combustion parameters of circulating fluidized bed boilers with the help of a high temperature cyclone seperation device for the segregation of gases and solids.
该文根据设计和运行经验，简单介绍了用高温旋风分离器作气固分离装置的循环流化床锅炉主要燃烧参数的运行调整。
3) combustion time
燃烧时间
1.
Through simplifying the combustion model of Coal-Water Slurry, the combustion time of Coal-Water Slurry is calculated and the effects on the combustion efficiency of Coal-Water Slurry are analyzed.
通过简化水煤浆的燃烧模型,计算了水煤浆的燃烧时间,分析了影响水煤浆燃烧效率的因素,提出了改善水煤浆燃烧效率的途径,并介绍了国内首次在玻璃熔窑上进行的水煤浆燃烧应用试验。
2.
Experimental results show that flame propagation speed is proportional to combustion time and the gained width of reaction region from experiments is much greater than one gained from the turbulence theory.
通过实验结果得到了燃烧时间与火焰传播速度之间成直线关系 ,以及实验中反应区的宽度要远大于湍流燃烧理论中的反应区宽度的结论。
3.
The paper introduces a new method of measuring combustion time with CAT technique for solid rocket engine.
介绍一种应用ＣＡＴ技术确定固体火箭发动机燃烧时间的新方法。
4) Burning time
燃烧时间
1.
An analytical determination method of the burning time for solid rocket motors;
固体发动机燃烧时间的一种解析算法
2.
The relation equation of pressure drop in oil tank vers burning time and the air volume is established.
分析了几种便携式燃烧器系统的特点和应用的热负荷范围 ;导出了油箱容积、气箱容积、充气间隔的压力降和燃烧时间的关系。
3.
: Based on productive and experiomental data, the factors affecting the burning timeof safety fuse, such as composition and mixing time of black power and ambient conditions are analyzed and concluded.
文中以生产和实验数据为依据，总结并分析了黑火药组分、混合时间和环境条件对工业导火索燃烧时间的影响。
5) combustion reference
燃烧学参数
1.
Based on tranditional combustion calculation principle and theoritical analysis, a calculation method on combustion references is presented in this paper to approch mix-combustion with multi-fuel under normal condition.
文章根据经典的燃烧学参数计算方法 ,通过对混烧技术的理论分析 ,提出一种适用于常见燃烧条件下多燃料混合性燃烧工程实际的燃烧学参数计算方法。
6) combustion characteristic parameters
燃烧性参数
1.
The combustion characteristic parameters,namely the ratio between area of smoke temperature net rising curves apices per unit mass fuel in flaming stage and ignition time,were put.
为比较植物的燃烧性,用自行设计的燃烧试验装置对4种杨梅科植物和2种易燃的对比植物的鲜枝叶进行了燃烧试验,在测定和分析样品引燃时间、有焰燃烧阶段烟气温度变化和质量损失过程等的基础上,提出了植物的燃烧性参数P,即单位质量可燃物在有焰燃烧阶段产生的烟气净温升峰面积与引燃时间之比。
2.
The combustion characteristic parameters were put forward based on lighting time,smoke temperature and weight losing in flaming stage.
为比较植物的燃烧性,用自行设计的燃烧试验装置对20种园林绿化植物的鲜枝叶进行燃烧试验,在测定和分析样品引燃时间、有焰燃烧阶段烟气温度变化和质量损失过程等的基础上,提出了植物的燃烧性参数P。
3.
The combustion characteristic parameters, namely the ratio between area of smoke temperature net rising curves apices per unit mass fuel in flaming stage and ignition time, were put forward based on lighting time, smoke temperature and weight losing in flaming stage.
用自行设计的燃烧试验装置对昆明地区25种木本植物的活枝叶进行了燃烧试验,在测定和分析样品引燃时间、有焰燃烧阶段烟气温度变化和质量损失过程等基础上,提出了植物的燃烧性参数,即单位质量可燃物在有焰燃烧阶段产生的烟气温升峰面积与引燃时间之比。
补充资料：沸腾床燃烧(见流化床燃烧)
沸腾床燃烧(见流化床燃烧)
boiling-bed combustion:see fluidized-bed combustion
沸腾床燃烧(boiling一bed eombustion)见流化床燃烧。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条