1) Shear layer
剪切层
1.
The optimization study of optical performance of shear layer in free-vortex ADW;
超声速自由涡气动窗口剪切层光学性能的优化设计研究
2.
Supersonic jet with interaction between shock and shear layers;
激波和剪切层相互作用下的超音速射流
3.
Passive Control of the Shear Layer of a Jet and the Related Premixed Flames;
射流剪切层及相关预混火焰的被动控制
2) interlaminar shear
层间剪切
1.
The curves showing the relationship between the strength of the ultrahigh molecular weight polyethylene fiber bundle treated by atmospheric argon plasma and the epoxy resin interlaminar shear strength were investigated by varying technical conditions of low temperature and atmospheric argon plasma.
改变低温常压氩等离子体处理条件,考察处理后超高分子量聚乙烯纤维束强度与环氧树脂层间剪切应力与各变化因子的关系曲线,通过比较性能的变化,研究氩等离子体处理条件对纤维界面性能的影响。
3) Delamination shearing
分层剪切
1.
Delamination shearing theory functionally gradient materials laminted beam under complex loads;
功能梯度材料悬臂梁受复杂载荷作用的分层剪切理论
4) the shear layer
热剪切层
1.
In this paper,the behaviors of thermocapillary convection were numerically simulated under the different gravity and what were concluded the strong disturbance occurred in the shear layer due to the thermocapiUary convection under microgravity.
在水平温度梯度下,双层流体交界面的表面张力会出现梯度,驱动热毛细对流运动,造成热剪切层内的扰动。
5) shear fault
剪切断层
1.
Because the oil and gas conservation was controlled by the late shear fault, the pattern of oil and gas accumlation in the south and middle part of Zhedong Centra.
由于浙东中央背斜带中南部油气藏的保存主要取决于晚期剪切断层 ,因此对晚期剪切断层的研究 ,确定晚期切断层对油气藏的破坏规律 ,就可基本解决浙东中央背斜带中南部的油气成藏规律。
6) bedding shear
顺层剪切
补充资料：层间剪切强度
分子式：
CAS号：
性质：层压件和纤维增强复合材料中层与层之间的最大剪切强度。作用于面上的应力与面相平行。其值较小。如树脂为环氧体系，增强材料为玻璃纤维时，纤维方向的拉伸强度达103MPa，而层间剪切强度为40～50MPa。
CAS号：
性质：层压件和纤维增强复合材料中层与层之间的最大剪切强度。作用于面上的应力与面相平行。其值较小。如树脂为环氧体系，增强材料为玻璃纤维时，纤维方向的拉伸强度达103MPa，而层间剪切强度为40～50MPa。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条