1) anti-liquefaction
抗液化
1.
Based on the engineering practice of loess ground improvement in Lanzhou railway vehicle factory, the enhancement effect and anti-liquefaction behavior of chemical grouting are evaluated in detail.
以兰州车辆整备场路基的加固工程为例 ,详细评价了化学灌浆法的加固效果及其抗液化性状 ,进行了标准贯入试验和室内动三轴试验。
2.
This article summed up commonly used anti-liquefaction processing in ease-liquefied foundations at home and abroad,including excavation and replacement,densification,enclosure,grouting and mixing,sur- charge,drainage,reinforced mat and pile foundation,etc.
总结了目前国内外常用的易液化地基抗液化处理工程措施,其中包括挖除置换、加密、围封、灌浆拌和、增压、排水、加筋、桩基础等。
3) liquefaction resistance
抗液化强度
1.
How to properly evaluate the in-situ liquefaction resistance of saturated sand strata
如何正确评价原位饱和砂土的抗液化强度
2.
The study result has shown that when the fines content is about 35 %,the liquefaction resistance of tailings is the best.
该式可以分析不同细粒含量的尾矿材料的抗液化强度,提高尾矿坝液化判别方法的判别准确程度。
3.
The relativity between the shear wave velocity and the liquefaction resistance of undisturbed and remolded loose saturated silt is analyzed by a kind of combined test apparatus on which shear wave velocity and dynamic triaxial test of soil specimen.
采用剪切波速与振动三轴联合试验装置,分析了原状和重塑饱和松散粉土的抗液化强度与剪切波速之间的相关性。
4) anti-liquefying treatment
抗液化处理
5) anti-liquefaction mechanism
抗液化机理
1.
Research on anti-liquefaction mechanism of composite foundation of gravel pile;
碎石桩复合地基抗液化机理的研究
6) anti-seismic against liquefaction
抗震防液化
1.
The practice has proved that the ground stabilixation with the crushed stone plies can improve the bearing capacity of the foundation, resisting slide stabilization of and anti-seismic against liquefaction of.
介绍在辽河石佛寺水库地层结构条件下,碎石振冲桩施工机械、施工方案、工艺参数的比选和确定,施工检测结果证明,碎石振冲桩复合地基加固技术对提高基础的承载力与抗滑稳定及抗震防液化能力效果显著。
补充资料：α-型抗结晶抗絮凝酞菁蓝
分子式：
CAS号：
性质：红光蓝色粉末。属于稳定α-型晶相。具有良好的耐溶剂稳定性。在溶剂中不发生色光与晶型的转变。日晒牢度7～8级。以铜酞菁母体与甲醛缩合，其产物与N-羟甲基苯二甲酰亚胺反应，生成的N-羟甲基苯二甲酰亚胺衍生物与铜酞菁母体以1:10质量比混合，再经酸溶，析出，过滤，漂洗，干燥得最终产物。用于高档油墨、涂料及塑料的着色。
CAS号：
性质：红光蓝色粉末。属于稳定α-型晶相。具有良好的耐溶剂稳定性。在溶剂中不发生色光与晶型的转变。日晒牢度7～8级。以铜酞菁母体与甲醛缩合，其产物与N-羟甲基苯二甲酰亚胺反应，生成的N-羟甲基苯二甲酰亚胺衍生物与铜酞菁母体以1:10质量比混合，再经酸溶，析出，过滤，漂洗，干燥得最终产物。用于高档油墨、涂料及塑料的着色。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条