说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 移动缝线
1)  movable suture
移动缝线
1.
Objective To study the effective way to solve the tardy recovery of anterior chamber after operation on glaucoma Method We used the movable suture from the outer conjunctive according to the condition of recovery of anterior chamber Result The intraocular pressure after operation was mormal, among 36 eyes the recovery of anterior chamber within 48 hours was found in 24 eyes(66.
方法 在小梁切除术中采用可移动缝线关闭巩膜瓣联合应用抗纤维生成抑制剂 ,术后根据前房恢复情况从结膜外拆巩膜瓣缝线。
2)  weld line movement
焊缝移动
1.
Using the finite element method software Dynaform,numerical simulations of blank holder force are carried out to reseach its influence on the strain path of the dangerous point and the weld line movement on the condition of different BHF.
用有限元分析软件Dynaform对拼焊板方盒件成形进行数值模拟,研究不同压边力对拉深过程中破裂危险点应变路径和焊缝移动的影响规律。
2.
The weld line movement was one of the important factors for the formability of TWBs.
拼焊板冲压成形时焊缝会产生移动,使得最大工程应变发生在弱材近焊缝区,造成开裂失效,焊缝移动是对拼焊板成形性影响最重要问题之一。
3)  weld-line movement
焊缝移动
1.
The conclusions show that different tendencies of weld-line movement occur in different .
研究发现,盒形件不同部位其焊缝有不同的移动趋势,传统拉深最大焊缝移动量发生在盒形件底部中心处,充液拉深件焊缝移动最大量发生在侧壁顶部,增大充液拉深凹模油腔的压力,可以有效地减少焊缝移动量和坯料的减簿量。
2.
Based on finite element simulation software Dynaform,the influence of process parameters such as blank holder force,liquid pressure and its loading paths on the weld-line movement in hydro-forming deep drawing of TWBs with different thickness was simulated and investigated.
基于Dynaform分析软件,就差厚拼焊板充液拉深盒形件的压边力、液体压力及加载方式对焊缝移动的影响进行仿真与研究。
4)  welded-line movement
焊缝移动
1.
The investigations include mechanism of TWBs′ springback,influence of distribution of BHF on TWBs′ springback and the relation between TWBs′ springback and welded-line movement.
研究拼焊板回弹机制,考察压边力分布对拼焊板回弹的影响及拼焊板回弹与焊缝移动的关系。
2.
Fracture and welded-line movement are two main problems in stamping of multi-gauge laser tailor-welded blanks.
破裂和焊缝移动是差厚激光拼焊板成形中存在的两个主要问题。
3.
For tailor-welded blanks(TWBs) square box,adopted the self-made hydrostatic press and the square box mould with split binder,the forming strain path,the welded-line movement and the forming limit depth were analyzed by the numerical simulation and the stamping experiment with various technological parameters.
采用自制液压机和分瓣压边圈模具,通过模拟仿真和实冲试验,变化各工艺参数,研究分析拼焊板方盒件冲压成形的应变路径、焊缝移动和成形极限,以提高其成形性能。
5)  welding line movement
焊缝移动
1.
The mechanism of the metal flow and the welding line movement was investigated in the forming of the two parts by numerical simulation in the situation of different binder hold forces(BHF),BHF distribution,the positions and directions of the welding line movement,and the stress and strain distribution to analyze farther the square box of TWBs.
将拼焊板盒形件分解成包含横向或纵向焊缝的U形件拼焊板,从分析简单U形件拼焊板出发,考虑压边圈类型及压边力大小和分布、焊缝位置和方向等因素的作用,研究盒形件拼焊板金属流动规律和焊缝移动原因及移动趋向。
2.
The welding line movement in the forming makes the maximum engineering strain occur at weaker part of TWBs close to the weld line zone.
由于基体金属的负载能力的差异,拼焊板冲压成形时焊缝会产生移动,而拼焊板的成形失效直接与焊缝移动有关,焊缝移动使得最大工程应变发生在弱材近焊缝区,造成开裂失效,焊缝移动是对拼焊板成形性影响最重要问题之一。
6)  Seamless Mobility
无缝移动
1.
As the development of the mobile and wireless communications technology, The concept of integrated network of Seamless Mobility begin to come out.
随着移动通信技术的发展,无缝移动的综合网络概念开始出现。
2.
Thus the deficiency in realizing seamless mobility of the existing mobile network model is fairly avoided.
通过建立相应模型并进行仿真对比分析,该方案能够保证网络移动切换过程中零丢包率和可控制的时延抖动,完全可以实现网络无缝移动的有关性能指标,从而较好地解决了现有移动网络模型实现无缝移动过程中的不足。
补充资料:缝线
1.缝纫拈线。 2.缝制所用之线。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条