1) reinforcement
[英][,ri:ɪn'fɔ:smənt] [美]['riɪn'fɔrsmənt]
抗折
1.
Effect of Amalgam bondign to cusp enamel reinforcement vitro test;
银汞粘结对牙尖无基釉抗折的影响——体外实验
2) bending strength
抗折强度
1.
Expermental research on the influence of hair fibre on the bending strength of cement;
毛发纤维对水泥抗折强度影响的实验研究
2.
The effects of secret-water on cement concrete bending strength;
泌水对水泥混凝土抗折强度的影响
3.
On the basis of the damage and corrosion mechanism of the used tuyere sleeves of Baosteel,use the brown corundum and zircon power as the raw materials and study the thermal shock resistance,bending strength,compressing strength,porosity of Al2O3-ZrO2 for new sleeve.
在掌握了宝钢现有风口衬套破损原因和侵蚀机理的基础上,提出以棕刚玉和锆英石粉为主要原料,实验研究了新型风口衬套材质Al2O3-ZrO2的抗热震性、抗折强度、抗压强度、气孔率。
3) flexural strength
抗折强度
1.
Influence of process factors on the flexural strength of ZrO_(2(f))/PMMA-PMA composites;
工艺因素对ZrO_(2(f))/PMMA-PMA复合材料抗折强度的影响
2.
Study on the effect of steel fiber adding ways on concrete flexural strength;
钢纤维掺加方式对混凝土抗折强度影响研究
3.
Analysis on flexural strength in adhesive section of mortar with different strengths;
不同强度砂浆粘结面处抗折强度分析
4) folding strength
抗折强度
1.
Phase composition and microstructure of the composites were characterized by XRD and SEM,respectively,and the folding strength and compression strength were tested by universal testing machine.
力学性能测试结果表明,当掺入10%SiC(质量分数)时,材料的抗折强度最大,为58。
2.
The effects of five kinds of water-reducing agents: calcium lignosulfonate(CLS),modified calcium lignosulfonate(GCL1-6A),amino-sulfonic based superplasticizer(ASP),sulfonated naphthalene formaldehyde(FDN) and sulfonated melamine urea formaldehyde resin(SMUF) on the mechanical performances of mortar were studied,which include the compressive strength and folding strength.
研究了木素磺酸钙(CLS)、改性木素磺酸钙(GCL1-6A)、氨基磺酸甲醛缩合物(ASP)、萘磺酸甲醛缩合物(FDN)和三聚氰胺脲醛树脂(SMUF)5种减水剂对砂浆抗压强度和抗折强度的影响。
3.
On the basis of summarising of up the one\ s experience of the works, this article puts forwords to the design method of the mix proportion, which is the more practible method that folding strength be used for the design indice and describes some experience on the selection of the raw and processed materials.
在总结实践经验的基础上 ,文章提出较实用的以抗折强度为设计指标的配合比设计方法 ,介绍一些原材料的选用经
5) Wrinkle Resistance
抗折皱性
1.
Linen fabric has some defects such as low elasticity and softness,handle roughness and bad wrinkle resistance.
通过对处理前后织物的弯曲长度、折皱回复角和撕裂强力对比分析发现 ,用该柔软剂处理后的织物在柔软性和抗折皱性方面都有明显的改善 ,是比较理想的可应用于亚麻织物的柔软整理剂 ,同时确定了最佳工艺条
6) resistance
[英][rɪ'zɪstəns] [美][rɪ'zɪstəns]
抗折性能
1.
Fracture resistance of residual teeth restored with two different post and core systems;
两种桩核修复系统对残根抗折性能的影响
2.
An in vitro study on the fracture resistance of teeth restored with surface sandblasted casting posts;
铸造桩表面喷砂处理对牙根抗折性能影响的体外实验研究
3.
Objective: This study is aimed at analyzing the effects of bonding surface treatments including sandblasting on the posts surfaces and acid etching on root canal walls on the fracture resistance of teeth restored with casting posts and cores.
目的：研究铸造桩表面喷砂处理及根管内表面酸蚀处理对根管治疗及桩核修复后的牙根抗折性能的影响。
补充资料：抗折
1.古葬具。指抗席与抗木。 2.谓与之抗辩而使折服。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条