1) copper brushing plating
电刷镀铜
2) brush copperplating
刷镀镀铜
1.
In this paper, the effects of process parameter of brush copperplating on the copper film for prevention of carburization were studied; the relation between the time of carburization and the minimun thickness of copper film for prevention of carburization was established.
研究了用刷镀镀铜防渗碳时的工艺参数对镀层防渗碳效果的影响 ,及渗碳时间与防渗碳所需的最小镀层厚度之间的关系。
3) copper brush plating
刷镀铜
1.
Low temperature brazing of aluminium plate was studied experimentally after copper brush plating, which is the key technique for the electric conduction and then the electromagnetic shielding shelter.
通过对电刷镀铜和低温钎焊技术的综合研究,制造出了屏蔽效能较高的大板式方舱产品,有效地解决了其各大板间的电气连接问题,并保证了方舱结构上的完整性。
4) Flow Plating Technology (FPT)
电刷镀流镀
5) brush electroplating
电刷镀
1.
Study on technology of brush electroplating Ni-PTFE composite coating;
电刷镀Ni-PTFE复合镀层工艺研究
2.
Effect of surface active agents on dispersion stabilization of nano Al2O3 in brush electroplating solution had been researched by spectral photometer.
采用分光光度计研究了表面活性剂对纳米Al2O3颗粒在电刷镀液中分散稳定性的影响。
3.
The nanoparticle and amorphous composite coating n-Al_ 2 O_ 3 /Ni-P was prepared on mild steel AISI 1045 surface via nano brush electroplating process in order to gain high contents of P element and n-Al_ 2 O_ 3 particle and their optimum matching in the coating.
采用纳米电刷镀技术在钢基体表面制备了n-Al2O3/Ni-P复合刷镀层,研究了复合刷镀液中纳米颗粒含量、刷镀电压和刷镀笔移动速度对复合刷镀层中P和Al2O3含量的影响。
6) brush-plating
电刷镀
1.
Composite Technics of Shot-peening and Brush-plating for Renovating Gears on Helicopter;
直升机齿轮喷丸-电刷镀复合修复工艺研究
2.
Application of cohering and brush-plating composite technology;
粘涂—电刷镀复合工艺的应用
3.
Researehes on Compound Brush-plating of Ni-W-SiC;
镍-钨-碳化硅复合电刷镀研究
补充资料：电刷镀
分子式：
CAS号：
性质：一种改进型的刷镀技术，除不用电镀槽和阳极为惰性的电刷型“镀笔”外(这些与原来的刷镀类似)，其特点为：高浓电液；高电流密度(高速电镀)和采用便于控制的专用电源。该法适用于现场维修和制造，可获得高品质的部件。电刷镀有时仍简称刷镀，也有称之为涂镀或笔镀的。
CAS号：
性质：一种改进型的刷镀技术，除不用电镀槽和阳极为惰性的电刷型“镀笔”外(这些与原来的刷镀类似)，其特点为：高浓电液；高电流密度(高速电镀)和采用便于控制的专用电源。该法适用于现场维修和制造，可获得高品质的部件。电刷镀有时仍简称刷镀，也有称之为涂镀或笔镀的。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条