1) ~(18)FDG-PET
18FDG-PET
1.
The Clinical Application of ~(18)FDG-PET on Lung Cancer;
介绍了肺癌患者18FDG-PET在临床上的应用价值及其在临床应用中存在的问题。
2) ~(18)FDG
18FDG
1.
In order to evaluate the value of ~(18)FDG-PET in the diagnosis and staging of colorectal carcinoma,24 patients with potentially colorectal carcinoma are made ~(18)FDG-PET examination.
对24例经肠镜检查初步诊断为直肠、结肠癌的患者进行18FDG-PET显像研究,评价18FDG-PET对大肠癌诊断、分期及治疗计划的价值。
2.
A practical method is established for determining the radiochemical purity of ~(18)FDG rapidly.
采用薄层色谱和纸色谱法对不同的展开体系进行筛选,找到了三种适宜的展开体系,建立了测定18FDG注射液放化纯度的分析方法。
3.
To evaluate the value of ~(18)FDG-PET in the diagnosis and management of patients with gastric carcinoma, 33 patients with potentially gastric carcinoma by endo and 19 patients operated are included.
对33例经胃镜检查初步诊断为胃癌的患者进行18FDG-PET(18F脱氧葡萄糖-正电子断层扫描)检查,并经手术和病理证实,胃癌术后随访病例19例,以评价18FDG-PET对胃癌的诊断价值。
3) 18F-fluoro-2-deoxy-D-glucose positron emission tomography (18FDG-PET-CT)
18F-氟代脱氧葡萄糖-正电子发射计算机体层摄影(18FDG-PET-CT)
4) poly(ethylene terephthalate)
PET
1.
Studies on the Lipase Monolayer Film Self-assembly on the Nagatively Charged Poly(ethylene terephthalate) Substrate;
脂肪酶在负离子化PET表面的单分子层自组装膜研究
2.
Carbon black(CB) was added into poly(ethylene terephthalate)/polyethylene(PET/PE) blend by discretely feeding technology and fiber grade PET/PE/CB conductive master batch with good combined properties was prepared in reciprocating pulsation extruder.
采用分离喂料技术在聚对苯二甲酸乙二酯(PET)/聚乙烯(PE)共混物中加入导电炭黑(CB),通过布斯往复式脉动挤出机熔融共混、挤出造粒,制备了综合性能较好的纤维级PET/PE/CB导电母料。
5) polyester
[英][,pɔli'estə(r)] [美]['pɑlɪ'ɛstɚ]
PET
1.
Uncertainty evaluation of photometric determination of the carboxyl end group in polyester;
光度法测定PET中端羧基的不确定度评定
2.
Using carbon black as conductive medium and polyester as matrix the carbon black/polyester composite fiber was prepared with the blend method.
以碳黑为导电介质,以PET为基体,用共混方法纺出共混导电纤维。
3.
The development and current situation of polyester catalysts were introduced.
介绍了PET催化剂的发展及现状,简要比较和评价了各种锑系催化剂及应用,对目前国内外较为关注的各种钛系催化剂及应用概况、合成技术等进行了分析和总结,对新型催化剂的发展趋势进行了展望。
6) Positron emission tomography
PET
1.
Methods Neurological and scalp EEGs were performed in 35 patients with posttraumatic epilepsy, who also underwent CT, MRI examination, single photon emission computerized tomography (SPECT) and positron emission tomography (PET) prior to intracranial surgery, with intraoperative monitoring of the cortical EEG.
方法对35例创伤性癫痫病人进行电生理学、CT、MRI、SPECT及PET检查后行外科治疗,开颅手术病例术中行皮层脑电监测。
2.
Objective To localize the epileptic foci with positron emission tomography (PET), and study the principles of target definition and method to determine the optimal range of exposure in radiosurgery for intractable epilepsy.
目的 利用PET致痛灶定位,研究放射外科治疗顽固性癫痫的靶区设定原则,确定最佳周边剂量范围。
补充资料：PC/PET blend PC/PET
分子式：
CAS号：
性质： 共混物一般采用机械共混法制备，具有较好的相容性，尤其当PET/PC在60％～70％/40％～30％的共混比例下相容性最好，若PET含量少于上述比例，则共混物具有两相结构。其特点是：有较优良的拉伸强度和加工流动性，在宽广的温度范围内有很高的冲击强度，悬臂梁冲击强度在室温时为960J/m，在-20℃时仍保持为693J/m。有优异的耐化学腐蚀性，司在汽油、机油中工作，并且无应力开裂。刚性好，耐磨，尺寸稳定。耐热性好，加工工艺性良好等。该类共混物适于制造汽车零件，运动器材，草地及园艺工具，各种工业用机械零件。用此类共混物代替超韧尼龙在高温、低温和化学腐蚀性强的环境中使用，能保持良好的尺寸稳定性。
CAS号：
性质： 共混物一般采用机械共混法制备，具有较好的相容性，尤其当PET/PC在60％～70％/40％～30％的共混比例下相容性最好，若PET含量少于上述比例，则共混物具有两相结构。其特点是：有较优良的拉伸强度和加工流动性，在宽广的温度范围内有很高的冲击强度，悬臂梁冲击强度在室温时为960J/m，在-20℃时仍保持为693J/m。有优异的耐化学腐蚀性，司在汽油、机油中工作，并且无应力开裂。刚性好，耐磨，尺寸稳定。耐热性好，加工工艺性良好等。该类共混物适于制造汽车零件，运动器材，草地及园艺工具，各种工业用机械零件。用此类共混物代替超韧尼龙在高温、低温和化学腐蚀性强的环境中使用，能保持良好的尺寸稳定性。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条