1) storage time
保存期限
1.
The experimental research of gauze strip storage time and using time limit of Jinhuang ointment and Shengjixiangpi ointment;
金黄膏及生肌象皮膏纱条使用及保存期限的实验研究
2) minimum growth temperature
最低保存期限
3) preservation
保存
1.
Abnormal Pore Fluid Pressure of K_1d_1 in Wuerxun Depression and Its Effect to Oil and Gas Preservation;
乌尔逊凹陷大一段异常孔隙流体压力及其对油气保存的作用
2.
Role of abnormal high pressure in the formation and preservation of oil(gas) reservoirs in the north of Songliao Basin.;
松辽盆地北部异常高压在油气成藏与保存中的作用
4) storage
保存
1.
Transformation of arsenic species in soil samples stored under different conditions:recommended technique of soil sample storage for arsenic species analysis;
土壤样品保存过程中无机砷的形态变化及其样品保存方法
2.
To investigate the affect of different storages on blood alcohol concentration;
不同保存条件对血液酒精浓度检测的影响
5) conservation
保存
1.
Experimental Study of the Best Activation Cultivation and Conservation for Hp;
优化幽门螺杆菌最佳培养保存条件实验研究
2.
Nd∶YAG Laser Irradiation Applied to Conservation of Subgingival Residual Root;
Nd∶YAG激光在龈下残根保存治疗中的应用研究
3.
Effects of Culture Conditions on the Physiological Indexes during Embryogenic Callus Conservation in Litchi;
培养条件对荔枝胚性愈伤组织保存中生理指标的影响
6) Preserve
保存
1.
The sperm motility of Amur grayling were measured by BSS and water in temperature of 4℃ and 14℃(room temperature),preserved the sperm and diluted sperm by ASP for experiment.
用BSS和水两种激活剂对黑龙江茴鱼精子活力进行测定,并在4℃和14℃(室温)条件下,对精原液和用ASP稀释的精液分别进行保存试验。
2.
So we must take actual steps to preserve and protect endangering languages and culture of minorities.
为此,我们必须采取实际步骤,保存和保护濒危语言和文化。
3.
The test results show that under the low-temperature refrigeration and sealed storage conditions,the sulfide standard solution is relatively stable and can be preserved for 12 months,so that the reagent consumption has been greatly reduced and the work efficiency can be enhenced.
对硫化物标准溶液保存的时间进行了探讨,试验结果表明,在低温冷藏和密封贮存的条件下,配置的硫化物标准溶液性质比较稳定,可以保存12个月,因此大大降低了试剂的消耗,提高了工作效率,并结合多年的分析体会,提出了分析过程中应注意的事项,在实际工作中有一定的推广价值。
参考词条
补充资料:Pro/E 保存工程图
Pro/ENGINEER 在绘图模式下,可以保存很多内容,如实体,信息,以及建立的或修改的模型内容。主要有如下部分:
所有绘制的实体
实体出现的视图
在图中实体出现的位置
尺寸中出现的打断或折弯
在尺寸中插入的注释
文本的字体、高度、宽度及倾斜角度
除了保存工程图外,对模型的保存主要包括如下内容
几何公差
尺寸信息(包括考尺寸及被驱动尺寸driven dimensions)如:
附加文本
尺寸放置类型
公差表的附着几何体
轴线或平面
值或公差信息
基本的和指定的属性
表面粗糙度:包括值和类型
模型简化信息
模型中所有层的信息
2 不修改模型(To Disallow Changes Affecting the Model)
如果仅仅改变图纸,而不改变与之相关的模型,在config中设置“draw_models_read_only”选项为“yes.”。在种情况下,当修改了图纸后,模型并不随之修改。(站的话:这种用途似乎不太大)
3 保存工程图,而不保存模型(To Save the Drawing without Storing the Model)
如果仅仅需要保存图纸,而不保存模型,则在config中将选项“save_modified_draw_models_only”设为“yes.(
所有绘制的实体
实体出现的视图
在图中实体出现的位置
尺寸中出现的打断或折弯
在尺寸中插入的注释
文本的字体、高度、宽度及倾斜角度
除了保存工程图外,对模型的保存主要包括如下内容
几何公差
尺寸信息(包括考尺寸及被驱动尺寸driven dimensions)如:
附加文本
尺寸放置类型
公差表的附着几何体
轴线或平面
值或公差信息
基本的和指定的属性
表面粗糙度:包括值和类型
模型简化信息
模型中所有层的信息
2 不修改模型(To Disallow Changes Affecting the Model)
如果仅仅改变图纸,而不改变与之相关的模型,在config中设置“draw_models_read_only”选项为“yes.”。在种情况下,当修改了图纸后,模型并不随之修改。(站的话:这种用途似乎不太大)
3 保存工程图,而不保存模型(To Save the Drawing without Storing the Model)
如果仅仅需要保存图纸,而不保存模型,则在config中将选项“save_modified_draw_models_only”设为“yes.(
说明:补充资料仅用于学习参考,请勿用于其它任何用途。