2) tetrasilicic fluormica
四硅氟云母
1.
Influence of Al_2O_3 content change on properties of tetrasilicic fluormica glass-ceramics used for dental restorations.;
氧化铝含量对牙用四硅氟云母微晶玻璃性能的影响
2.
According to the requirements of dental restorative materials, K 2O MgO MgF 2 SiO 2 glass ceramics system was chosen to make a machinable tetrasilicic fluormica glass ceramics used for dental CAD/CAM restorations and the influences of three different crystallization temperatures on it's physical properties were investigated.
根据齿科CAD/CAM加工用修复材料的要求 ,采用K2 O MgO MgF2 SiO2 微晶玻璃系统 ,通过差热分析 (DTA)、X射线衍射分析 (XRD)、扫描电子显微镜 (SEM )观测及物理性能测试 ,研究了 3种不同晶化温度对四硅氟云母微晶玻璃的晶化特性、微观结构及物理性能的影响。
3.
METHODS According to the requirements of dental restorative materials, K 2O MgO MgF 2 SiO 2 glass ceramics system was chosen to make tetrasilicic fluormica glass ceramics and three different temperatures were used to finish the crystallization procedure.
目的 研究晶化温度对牙科 CAD/ CAM加工用四硅氟云母微晶玻璃微观结构的影响 。
3) tetrasilicic-mica
四氟硅云母
4) Fluorosilicic mica glass-ceramics
氟硅云母玻璃陶瓷
1.
Effect of sintering and melt casting methods on mechanical properties of zirconia toughened fluorosilicic mica glass-ceramics composite powder
不同制备工艺对ZrO_2增韧氟硅云母玻璃陶瓷力学性能的影响
5) fluorophlogopite
氟金云母
1.
Influence of technological parameters on tools wear in turning fluorophlogopite;
氟金云母陶瓷车削参数对刀具磨损的影响
2.
Influence of technological parameter on tools wear in drilling fluorophlogopite;
氟金云母陶瓷钻削参数对刀具磨损的影响
3.
Experimental study on materials removal in turning of fluorophlogopite;
氟金云母陶瓷车削加工中材料去除的试验研究
6) fluormica
氟云母
1.
A machinable fluoramphibole glass-ceramic was fabricated by directly mixing fluormica crystals with recycled glass powder and sintering.
将废玻璃和氟云母晶体粉末混合,采用烧结法制备可加工氟闪石玻璃陶瓷。
2.
The reactive crystallizing behaviors in soda-lime glass powder with different additions of fluormica crystals were studied using X-ray diffraction and scanning electron microscopy during the sintering process.
用X射线衍射、扫描电镜研究了不同加入量氟云母晶体的钠钙玻璃粉末在烧结过程中的反应析晶。
3.
A machinable fluoramphibole glass-ceramic was fabricated by directly incorporating fluormica crystals with recycled glass powder and then sintered.
将氟云母晶体粉末直接与窗玻璃粉末混合后烧结,制备出可加工氟闪石玻璃陶瓷。
补充资料：氟硅氟碳杂链弹性体
分子式：
CAS号：
性质：主链上含有脂肪族氟碳链的氟硅弹性体。兼有氟碳弹性体与氟硅弹性体的综合性能。高温抗降解复原性比氟硅弹性体好。热稳定性稍有改进，耐温达288℃，低温性能稍逊。对钛和铝具有良好黏结性。适用于飞机油箱的密封材料、室温固化密封剂。
CAS号：
性质：主链上含有脂肪族氟碳链的氟硅弹性体。兼有氟碳弹性体与氟硅弹性体的综合性能。高温抗降解复原性比氟硅弹性体好。热稳定性稍有改进，耐温达288℃，低温性能稍逊。对钛和铝具有良好黏结性。适用于飞机油箱的密封材料、室温固化密封剂。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条