2) Three-dimensional porous nano-hydroxylapatite scaffold
三维多孔纳米-羟基磷灰石支架材料
3) porous scaffold
多孔支架
1.
The preparation and characterization of porous scaffold made of nano-hydroxyapatite/chitosan composite for bone tissue engineering;
骨组织工程用纳米羟基磷灰石/壳聚糖多孔支架材料的制备及性能表征
2.
A novel porous scaffold of nano-hydroxyapatite and polyamide6 for tissue engineering was made by a method of phase separation and particle leaching combined(PS/PL),NaCl and alcohol were used as pore forming agent.
以NaCl为致孔剂,采用粒子沥滤-相转移法制备了纳米羟基磷灰石/聚酰胺6(n-HA/PA6)多孔支架材料,用扫描电子显微镜(SEM),X射线衍射(XRD),示差扫描量热仪(DSC)等对其进行表征。
3.
This study is focused on tissue engineering porous scaffolds,especially the measurement of underlying degradation rates.
考察了聚乳酸多孔支架不同温度下的降解行为,提出了一种降解速率的快速外推方法。
4) porous scaffolds
多孔支架
1.
Fabrication and characterization of the porous scaffolds for bone tissue engineering;
骨组织工程多孔支架材料性质及制备技术
2.
Ladder-like and well-interconnected porous scaffolds were fabricated from poly(ether- ester)-poly(butylene terephthalate)-co-poly(cyclohexylene dimethyl terephthalate)-b-poly(ethylene glycol))(PTCG)-dioxane(DO)systems by means of a combination of freeze-drying and thermally induced phase separation(TIPS)technique.
采用热致相分离(TIPS)结合冷冻干燥技术制备了聚醚酯-(聚对苯二甲酸丁二醇酯-co-聚对苯二甲酸环己烷二甲醇酯-b-聚乙二醇)(PTCG)多孔支架,研究了聚合物质量浓度、粗化温度和溶剂组成等相分离参数对多孔支架形貌结构的影响。
3.
The biological performance of the porous scaffolds was assessed by in vitro chondrocyte culture.
采用明胶和氯化钠颗粒作为致孔剂,使用溶剂浇铸/颗粒沥滤法制备了高孔隙率、孔间连通和高机械性能的聚乳酸支架, 采用软骨细胞体外培养研究了这两种多孔支架对细胞生长性能的影响。
5) three-dimensional scaffold
三维支架
1.
It is concluded that a hybrid fibrin scaffold incorporating PLGA fiber has an interconnected pore structure,improved compression strength and potential to enhance the growth of rMSC to a certain extent,and is a promising three-dimensional scaffold for cells in tissue engineering.
实验证明纤维蛋白混合三维支架维持原纤维蛋白支架内部多孔隙三维结构,而且增大了支架的力学强度,在一定程度上提高了骨髓间充质干细胞在支架上的增长,在组织工程中是具有潜力的细胞生长三维支架。
6) scaffold
[英]['skæfəʊld] [美]['skæfold]
三维支架
1.
Objective: To explore and the characteristics of mesenchymal stem cells(MSCs) derived from rat bone marrow and compare with the difference of the directed inducing between scaffolds and planning condition ,and the feasibility of cartilage tissue-engineering regeneration.
目的:探讨大鼠骨髓间充质干细胞(MSCs)的分离、培养、冻存、复苏办法,比较MSCs在平面条件和在三维支架下向软骨细胞诱导的差异,细胞增殖力、细胞周期的变化,以及在裸鼠体内构建组织工程软骨的可能性。
补充资料：氨基多孔硅珠
分子式：
CAS号：
性质：一种二氧化硅胶，白色微珠形颗粒。以多孔硅珠为基料，与（3-氨基丙基）-三乙氧基硅烷反应制取。键合基团为—(CH2)3—NH2。比表面积400～450㎡/g。颗粒320～400目。为高速液相色谱填料，用于分配色谱。
CAS号：
性质：一种二氧化硅胶，白色微珠形颗粒。以多孔硅珠为基料，与（3-氨基丙基）-三乙氧基硅烷反应制取。键合基团为—(CH2)3—NH2。比表面积400～450㎡/g。颗粒320～400目。为高速液相色谱填料，用于分配色谱。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条