1) high temperature gas phase method
高温气相法
1.
The production process of fatty acid methyl ester with high acid value acidulated oil and fatty acid replaced superior quality fat and oil by high temperature gas phase method and supplemental ester translation process was also introduced.
对间歇式酯化 -酯交换工艺进行了具体分析 ,并着重介绍了采用高温气相法及补充酯交换工艺 ,以高酸值酸化油和脂肪酸代替高档油脂生产脂肪酸甲酯的生产工艺。
2) high temperature gas chromatography
高温气相色谱法
1.
A method was described for assaying physterol esters by high temperature gas chromatography using Agilent 6820 GC,hydrogen flame ionization detector and DB-5 high temperature column.
样品经水洗、正己烷提取并结晶等方法处理后,采用高温气相色谱法,使用Agilent 6820气相色谱仪、氢火焰离子化检测器、DB-5高温色谱柱直接进行定量分析。
3) high temperature capillary gas chromatography
高温毛细管气相色谱法
4) solid-state reaction
高温固相法
1.
A red-emitting KGd(WO4)2: Sm3+ was synthesized by solid-state reaction.
采用高温固相法合成KGd(WO4)2:Sm3+荧光粉,样品在近紫外区404nm光激发下发射出Sm3+的特征光谱。
2.
The phosphor yttrium aluminum garnet Y3Al5O12(YAG),activated with tr ivalent cerium(Ce3+)and gadolinium(Gd3+)Y3Al5O12:Ce,Gd(YAG:Ce,Gd)was synthesized through ultrasonic decentralization technology and solid-state reaction(SS).
采用超声波分散技术结合高温固相法合成了小颗粒铈钆激活的钇铝石榴石Y3Al5O12:Ce,Gd(YAG:Ce,Gd)荧光粉材料,并对其作了后处理,主要讨论了YAG:Ce,Gd的制备工艺条件,掺杂稀土离子等因素对其发光性能的影响,并且通过X射线对其进行了晶体分析,用扫描电镜进行了形貌分析,用荧光光度计F-4500测量了其激发光谱与发射光谱,用SPR-9200荧光粉光色参数综合分析系统对荧光粉光色参数分析测试。
3.
It can be synthesized by different methods: solid-state reaction, combustion, co-precipitation, sol-gel, spray prolysis, et al.
Ce 3+激活的钇铝石榴石Y3 Al5 O1 2(YAG)荧光粉是一种光致发光材料,可以通过各种方法制备获得,如:高温固相法、燃烧法、共沉淀法、溶胶-凝胶法、喷雾热解法等,而且通过掺杂其它元素,如用镓取代铝、用钆取代钇等方式改变YAG:Ce荧光粉的基质结构,或者掺杂不同的激活剂,来达到改变其发光特性的目的。
5) high temperature solid state method
高温固相法
1.
In the paper,photo-stimulated luminescence material SrS∶Eu,Sm was prepared by high temperature solid state method.
采用高温固相法制备了SrS∶Eu,Sm光激励发光材料。
6) high temperature solid-state method
高温固相法
1.
The layered cathode materials LiNi1/3Co1/3Mn1/3O2 for Li-ion battery were synthesized by high temperature solid-state method,sol-gel method and carbonate co-precipitation method,respectively.
采用高温固相法、溶胶-凝胶法和碳酸盐共沉淀法分别制备了锂离子电池层状正极材料LiNi1/3Co1/3Mn1/3O2。
2.
Based on this subject, carbon-coated LiNi_(1/3)Co_(1/3)Mn_(1/3)O_2 cathode materials synthesized via high temperature solid-state method was firstly discussed in detail.
本文首次对高温固相法碳包覆改性LiNi_(1/3)Co_(1/3)Mn_(1/3)O_2进行了系统的研究。
3.
V5+ doped titanium-bearing blast furnace slag as a kind of antibacterial materials based on photocatalysis was prepared by high temperature solid-state method.
采用高温固相法制备了V5+掺杂含钛高炉渣光催化抗菌材料。
补充资料：反应气相色谱法
分子式：
CAS号：
性质：又称元素色谱法 (elemental chromatography)。样品先经过一个反应区，被化学转化或吸附，然后随载气进入检测器，产生色谱图。反应区可置于色谱柱前、柱内或柱后。反应也可采用不同的反应方式。
CAS号：
性质：又称元素色谱法 (elemental chromatography)。样品先经过一个反应区，被化学转化或吸附，然后随载气进入检测器，产生色谱图。反应区可置于色谱柱前、柱内或柱后。反应也可采用不同的反应方式。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条