2) tops
[英][tɔps] [美][tɑps]
盖板针布
1.
Analysis is done to the impact of "the six grades" of new tops and the setting on carding performance as well as how to maintain the six grade constant for longer service life and efficiency of the card.
为了提高针布的使用寿命,更好地发挥梳棉机效能,分析了新型盖板针布“六度”对梳理的影响及如何保证“六度”的方法和工艺。
2.
Considering the factors with the clothing selection and selection sampling,the selection of the cylinder,doff,taker-in roller,roller,rotating tops and the attached elements should be carried out in conformity with raw material,types of the card.
为了保证梳棉机优质高产,介绍了锡林、道夫、盖板、刺辊针布及罗拉齿条、附加分梳元件的技术进步和相关参数的发展变化,结合金属针布选型前的考虑因素及选型举例,指出应根据所纺原料及梳棉机的不同,有针对性地选择锡林、道夫、刺辊、罗拉、活动盖板针布及附加分梳件,说明针布的选型、使用是一项较细致、多因素的工作,在纺纱实践中还应考虑多方面的工艺因素,只有做到合理配置,才会起到较好的分梳作用。
4) distributor
[英][dɪ'strɪbjətə(r)] [美][dɪ'strɪbjətɚ]
分布板
1.
Experimental study on particle distributor in gas-liquid-solid circulating fluidized bed;
气液固循环流化床颗粒分布板实验研究
2.
The development of the distributor and gas-induced atomizer nozzle structure, the electrostatic charging controlling,the state parameter monitor such as temperature and height in patent literatures are reviewed.
综述了国内外在优化分布板和导流设备、调节反应器内静电量、在线监测流化床的温度和高度等状态参数方面的专利进展。
3.
In this paper,through the CFD modeling of the ash-agglomerated fluidized bed gasifier,the gas molar concentration distributions in the bed with the influences of the oxygen flow rate from the central nozzle,the steam flow rate from the distributor and the pressure of the bed are studied.
通过CFD模拟了灰熔聚流化床气化炉,考察了操作条件包括中心管氧气量、分布板水蒸气量以及操作压力对流化床气化炉的气相浓度分布的影响。
5) flat clothing
盖板针布
1.
Development and Application of MCH52 Flat Clothing;
MCH52型盖板针布的研制和应用
2.
Design Characteristics and Carding Effect of JPT Flat Clothing;
JPT型盖板针布的设计制造特点及梳理效果
3.
Through the analysis of the developing trend of process equipment of flat clothing regarding the processes in the three main stages on the advantages and the disadvantages for further developing quality products.
通过对国内盖板针布不同阶段的工艺设备性能的分析,阐明随着时间的推进,工艺设备的先进性也逐步加强,对提高盖板针布的产品质量和档次有了保证。
6) sieve plate arrangement
筛板分布
补充资料：N,N-二缩水甘油2,4,6-三溴苯胺玻璃布层合板
分子式：
CAS号：
性质：以三溴苯胺环氧树脂为基料的玻璃布层合板。耐燃性好，相对密度>1.98。机械强度除冲击强度(190kJ/m2)和剪切强度(119MPa)外，其他略次于E-51环氧树脂。将三溴苯胺环氧树脂与有关添加剂配成胶液后，手工糊于玻璃布上，叠层并层合固化即得。可用于要求耐燃的航空、船舶和机电行业。
CAS号：
性质：以三溴苯胺环氧树脂为基料的玻璃布层合板。耐燃性好，相对密度>1.98。机械强度除冲击强度(190kJ/m2)和剪切强度(119MPa)外，其他略次于E-51环氧树脂。将三溴苯胺环氧树脂与有关添加剂配成胶液后，手工糊于玻璃布上，叠层并层合固化即得。可用于要求耐燃的航空、船舶和机电行业。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条