说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 参合
1)  participate in New Cooperative Medical System
参合
2)  parameter combination
参数组合
1.
The influences on activated sludge induced by ultrasonic treatments with different parameter combinations were studied by equal-distribution experiments about frequency,ultrasound intensity and irradiation time.
采用好氧活性污泥为试验材料,以污泥的比好氧呼吸速率(SOUR)、混合液悬浮固体浓度(MLSS)、COD去除率及污泥产率系数λ(ΔMLSS/ΔCOD)为指标,通过对超声频率、声强和作用时间3个参数设计的均匀试验,研究不同参数组合的超声处理对活性污泥的活性和代谢过程的影响。
2.
By studying and analyzing the difference of the samples in both sides and selection of the sampling parameter combination,the best combined sampling parameters were obtained as follows: to use 5 minutes to sample and to take 5 L spraying droplets per minute.
对于采样参数组合的选取以及双侧采样的空间差异性进行了研究和统计判断,得出了最佳采样参数组合为采样时间5 min,采气量5 L/min。
3)  comprehensive parameter
综合参数
1.
In attribute analysis, some conventional technologies such as the third generation Coherence Algorithm and multi attribute weighted comprehensive parameter method, are based on the analysis of covariance matrix eigen structure.
属性分析中有几项常用技术如第三代相干算法和多属性信息加权处理的综合参数法 ,算法中应用了协方差矩阵本征结构的分析。
4)  combined parameters
组合参数
1.
Improved back-propagation neural networks(shorted for improved BPNN)in which combined parameters are chosen as input vecter is used to identify joint damages of steel frame structures.
本文用改进的 BP 算法对框架结构节点损伤进行识别,并且选用组合参数作为网络的输入参数,还引入了神经网络的含噪声样本训练技术,以提高神经网络的抗干扰能力。
5)  meshing parameter
啮合参数
1.
Determination of the meshing parameter of pinion machine tool in cutting spiral bevel gears;
切制弧齿锥齿轮时机床啮合参数的确定
6)  stitching parameter
缝合参数
1.
The damage to stitching parameters such as stitching needle distance,row space,edge distance,single stitching or double stitching to the composite laminates was tested.
对复合材料开口缝合补强结构进行了实验研究,测试了不同缝合参数(针距、行距、边距、单重和双重缝合)补强对含孔复合材料层板的破坏强度,研究了孔边应力集中和缝合补强对强度、模量等力学性能参数的影响,分析讨论了孔边及邻近区域应变集中及应变分布的规律,通过实验结果和分析讨论,对复合材料开口缝合补强结构提出合理的设计方法。
2.
Stitched laminates with various stitching directions and stitch densities are experimentally studied, to reveal the effect of stitching parameters on in-plane tensile, compressive or shear properties and failure modes.
研究多种缝合方向、缝合密度对复合材料层板面内拉、压、剪等基本力学性能和典型失效模式的影响,并结合理论模型分析缝合参数影响层板力学性能的机理。
3.
The effects of stitching parameters on tensile strength are discussed.
同时系统讨论缝合参数对拉伸强度的影响规律,得到了一些重要结论。
补充资料:参合
1.验证相合。 2.并列。 3.符合。 4.谓综合观察。 5.综合参考。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条