1) laser ablation
激光蚀除
1.
The basic principle of molecular dynamics simulation is described, and then a review of the recent oversea as well as internal research on the mechanisms of laser ablation of metals, semi- conductor as well as organic solids etc·and the involved key techniques are summarized in de- tail·Some directions of further research on molecular dynamics simulation of laser ablation are indicated
介绍了分子动力学模拟的基本原理,并对国内外采用其研究金属、半导体、有机体等材料的激光蚀除机制的现状以及所涉及的关键技术进行了详尽的综述,最后指出了分子动力学模拟激光蚀除的进一步研究方向。
2) Ultrashort laser ablation
超短激光蚀除
3) laser ablation
激光烧蚀
1.
Progress in application of laser ablation inductively coupled plasma mass spectrometry in metallurgical analysis;
激光烧蚀进样电感耦合等离子体质谱法在冶金分析中的应用进展
2.
Ag nanoparticles colloids produced by pulsed laser ablation in distilled water;
蒸馏水中采用脉冲激光烧蚀制备Ag纳米粒子胶体
3.
Progress of quasi-one-dimension nanomaterials synthesized by laser ablation;
激光烧蚀法制备准一维纳米材料
4) laser ablation
激光刻蚀
1.
A Study on PVP and PVK by Surface Enhanced Raman Spectra and the Preparation of Metal Colloids by Laser Ablation;
聚乙烯吡咯烷酮和聚乙烯咔唑的表面增强拉曼光谱研究及激光刻蚀金属胶体的制备
2.
The influences of laser ablation processes on the solubility and the crystallizability of laser evaporated Al2O3-ZrO2 nanopowders were studied by X-ray diffractometer (XRD), X-ray absorption fine structure (XAFS) spectroscope and high resolution electron microscope (HREM).
利用X射线衍射, X射线吸收精细结构谱和高分辨电镜研究了激光刻蚀工艺对 Al2O3-ZrO2固溶度和结晶度的影响。
3.
The micrometer-scaled channels with different width and depth on the Si surface were prepared by pulse laser ablation.
因此,利用激光刻蚀表面方法可以在一定程度上调控固体表面的润湿性能。
5) Laser ablation
激光熔蚀
1.
Laser ablation inductively coupled plasma mass spectrometry was used for the rapid analysis of mercury in sediment samples.
采用激光熔蚀 电感耦合等离子体质谱法 (LA ICP MS)测定了底泥沉积物中的总汞 ,沉积物样品经高压压坯后直接进行激光熔蚀测定 ,并对内标选定、样品粒度以及汞的形态等影响因素进行了研究 ,以 2个底泥标准样和 1个土壤标准样的测定结果来绘制标准曲线 ,并用于实际样品的测定 ,方法简便实用 ,测定结果与同位素稀释冷蒸气发生ICP MS法十分吻合 ,方法检出限为 0 0 2mg·kg-1,测定速度可达每小时 10
2.
Laser ablation inductively coupled plasma mass spectrometry was used to determin thirty trace elements from the center to the edge of the manganese concretion.
应用激光熔蚀 -等离子体质谱法 ,以 Fe作内标 ,定量地测定了太平洋海山顶部锰结壳中 ,自核心到核表面不同层次中的 30多个微量元素的含量。
3.
A novel pulsed laser ablation technique has been used for the synthesis of nano crystalline diamond from a solid graphite target in the reactive liquid.
采用液体水中激光熔蚀固体石墨靶的方法，制成品形较好的六方金刚石相和立方金刚石，还观察到一种柱状纳米金刚石晶体。
6) laser ablating
激光烧蚀
1.
The material can also be PMMA when laser ablating is adopted.
分别简要地介绍了硅、玻璃和石英基片的机械加工法、光刻和蚀刻法与高分子基片的激光烧蚀法制备微流器件的原理和方法,以及实验结果。
2.
Several amorphic carbon films with different thickness were deposited on singlecrystal silicon by means of pulse laser ablating graphet target.
用激光烧蚀石墨靶方法在单晶硅衬底表面沉积了不同厚度的非晶碳膜。
3.
Several amorphic carbon films with different thickness were deposited on single crystal silicon by means of pulse laser ablating graphet target at room temprature.
在室温下 ,用激光烧蚀石墨靶方法在单晶硅衬底表面沉积了不同厚度的非晶碳膜。
补充资料：激光烧蚀
分子式：
CAS号：
性质： 是电感偶合等离子体质谱(ICP-MS)联用仪器中用来分析固体样品的一种进样方式。固体样品制成片状置于样品台上，样品表面处于激光束聚焦点上。使用红宝石激光器。一次0.5J的激光轰击，能在样品上产生一个直径为0.5mm，深0.5mm的小坑，消耗样品0.2mg。让等离子体注射气流流过样品表面，再经一导管导入等离子炬，样品在焰炬中即可电离。激光烧蚀所用激光器为大功率、高重复激光器，大面积采样。这样采样均匀性好，而且不受样品种类限制。采用激光烧蚀质谱技术，可以对样品微区进行分析。
CAS号：
性质： 是电感偶合等离子体质谱(ICP-MS)联用仪器中用来分析固体样品的一种进样方式。固体样品制成片状置于样品台上，样品表面处于激光束聚焦点上。使用红宝石激光器。一次0.5J的激光轰击，能在样品上产生一个直径为0.5mm，深0.5mm的小坑，消耗样品0.2mg。让等离子体注射气流流过样品表面，再经一导管导入等离子炬，样品在焰炬中即可电离。激光烧蚀所用激光器为大功率、高重复激光器，大面积采样。这样采样均匀性好，而且不受样品种类限制。采用激光烧蚀质谱技术，可以对样品微区进行分析。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条