1) dental porcelain
牙科陶瓷材料
1.
Advancement of the friction and wear of dental porcelain;
牙科陶瓷材料摩擦学研究进展
2) dental porcelain
牙科陶瓷
1.
Influence of manufacture technique on translucency and color of dental porcelain;
制作工艺对牙科陶瓷半透性和颜色的影响
2.
The mechanism and method of color match of dental porcelain is discussed in order to matchcolors vanadium-zirconium yellow,zirconium-praseodymium yellow,zirconium-ferrum red and chromium-aluminum-zincum red were introduced into the dental porcelain.
探讨牙科陶瓷配色的方法和机理,通过将钒锆黄、锆镨黄、锆铁红、铬铝锌红对牙科陶瓷进行配色。
3.
The mechanism and method of computer color match for ceramics is discussed by taking the dental porcelain as an example.
以牙科陶瓷为例探讨了陶瓷材料计算机配色的方法和机理,建立了牙科陶瓷计算机配色数据库,通过实验对数据库进行了修正,分析了配色不准的原因并提出了解决办法。
3) dental ceramic
牙科陶瓷
1.
Progress in carbon nanotube based dental ceramic material;
碳纳米管增韧牙科陶瓷修复材料的研究进展
2.
Development of the resin bond to dental ceramics;
牙科陶瓷树脂粘接研究进展
3.
Research on dental ceramics by Spark Plasma Sintering;
放电等离子烧结法制备牙科陶瓷的研究
4) dental ceramics
牙科陶瓷
1.
Damage morphology of dental ceramics indented by Hertzian’s contact;
牙科陶瓷赫兹接触破坏研究
2.
The Effect of Ion-Exchange Technique on Surface Strengthening of Dental Ceramics;
离子交换对常用牙科陶瓷表面增强效果的研究
3.
After contacted with the corrosive environment, observed by SEM, the exposed surface was covered in fewer voids in the part of glass phase, which is similar to other dental ceramics.
按牙科陶瓷国际标准ISO6872推荐标准对一种新型的牙科计算机辅助设计加工(CAD/CAM)陶瓷进行了体外表面抗腐蚀性研究。
5) dental porcelain fused to metal
牙科烤瓷材料
1.
Nano-sized Al_2O_3 powders were used as dispersed particles to improve the toughness and strength of low-temperature dental porcelain fused to metal,and XRD was used to determine the phase composition of nano-sized Al_2O_3 in the sintered specimen.
以纳米氧化铝为弥散颗粒,对低温牙科烤瓷材料进行了增强、增韧。
6) all-ceramic dental material
牙科全瓷材料
1.
Using the microwave sintering technology,the technology and property of nanometer all-ceramic dental material was studied.
作者采用微波烧结技术研究了纳米牙科全瓷材料的烧结工艺与性能,结果表明:微波烧结高纯α Al2O3全瓷在1600℃的温度下保温10min时,可达到99。
补充资料：牙科研磨材料
分子式：
CAS号：
性质：用于牙科修复治疗的研磨用工具和磨料。常用的工具有：金刚石磨头；橡胶磨杯；各种材料制成的抛光轮，如布、皮革、毛毡等。常用的磨料有：(1)各种抛光膏，如将氧化锡与水、甘油调和成腻子状，用于抛光牙组织；(2)各种不同硬度不同粒径的物质微粒，用于对牙组织、各种合金的研磨喷砂处理。这类物质有浮石粉、硅藻土、砂、刚玉、碳化硅、碳化硼及金刚石等。
CAS号：
性质：用于牙科修复治疗的研磨用工具和磨料。常用的工具有：金刚石磨头；橡胶磨杯；各种材料制成的抛光轮，如布、皮革、毛毡等。常用的磨料有：(1)各种抛光膏，如将氧化锡与水、甘油调和成腻子状，用于抛光牙组织；(2)各种不同硬度不同粒径的物质微粒，用于对牙组织、各种合金的研磨喷砂处理。这类物质有浮石粉、硅藻土、砂、刚玉、碳化硅、碳化硼及金刚石等。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条