1) fragmentation pathway
裂解方式
1.
The fragmentation pathway of raddeanin A was studied by electrospray ionization mass spectrometry(ESI-MS/MS) together with chemical derivatization.
以化学衍生结合电喷雾电离质谱(ESI-MS/MS)法研究银莲花素A的质谱裂解方式。
2.
The results showed that the MS2 fragmentation pathways of DASSSB were affected by the character and position of substitutes on salicylidene phenyl.
结果显示,这些化合物的ESI-MS/MS裂解方式与它们分子中水杨醛苯环上取代基的性质和位置有关:当水杨醛苯环上4位连接供电子取代基时,分子以C N双键断裂为主,生成[M+H-283]+碎片离子;当水杨醛苯环上5位连接吸电子取代基时,分子以C N双键β位的C-C键发生断裂为主,生成[M+H-254]+碎片离子。
3.
The fragmentation pathways of α-hydroxy phosphonates are studied with electrospray ionization mass spectrometry(ESI-MS).
研究了一系列α-羟基膦酸酯的电喷雾质谱裂解方式,发现该类化合物的加氢和加钠离子具有不同的裂解方式。
2) cracking electrolytic type
裂解电解式
1.
This paper devotes itself to the application o f cracking electrolytic type conductivity detector in gas analysis.
回顾了SF6气体作为绝缘灭弧介质在电力系统电气设备中的应用及运行气中低氯化物的常规分析方法，着重介绍了裂解电解式电导检测器在分析中的应用。
3) fracture mode
断裂方式
1.
The influence of fracture mode and wear surface pullout on wear resistance was studied.
研究了断裂方式对磨损表面剥落和耐磨性的影响。
2.
Transition of fracture mode was ob.
观察了氧化铝/莫来石复合陶瓷断裂方式的转变,计算了穿晶断裂比率与基体应力的关系,进而建立了莫来石含量、基体应力、穿晶断裂比率三者的对应关系。
3.
The microstructures, aging characteristics, mechanical properties and fracture modes at 25, 250, 300 and 350℃ were investigated.
6Zr合金,并对合金的微观组织、时效特性和不同温度下的力学性能及拉伸断裂方式进行研究。
4) fracture mechanisms
断裂方式
1.
The compression deformation and fracture mechanisms of 7075/SiCp prepared by spray deposition technique were investigated.
喷射沉积7075/SiCp复合材料高温压缩时的断裂方式主要有四种,即空洞在增强相与基体界面处形成而出现增强相从基体中拔出的现象、空洞在基体中形核长大而引起基体的延性断裂、颗粒团聚处的断裂和颗粒的脆性断裂。
2.
The effects of Ce on fracture mechanisms and properties were discussed.
研究表明 :2 0 90合金与 2 0 90 +Ce合金的断裂方式均以韧窝、分层开裂和沿亚晶界开裂 3种方式为主 ,随时效时间的延长 ,韧窝减少 ;分层先增加 ,后减少 ;沿亚晶界开裂比例逐渐加大。
5) Fracture modes
断裂方式
1.
The effects of different carbon coatings and high temperature treatment on the flexural strength and fracture modes of C/C-SiC composites were studied.
以针刺整体炭毡为坯体 ,采用CVD和树脂浸渍 /炭化混合法增密制备了 4种C/C多孔体 ,然后熔硅浸渗C/C多孔体制备了C/C SiC复合材料 ;研究了不同炭涂层、高温热处理对C/C SiC复合材料弯曲强度和断裂方式的影响。
6) initiation mode
起裂方式
1.
There are three possible initiation modes for hydraulic fracturing on the wellbore influenced by trend and dip of natural factures,including tensional fracture along natural fractures,shear fracture along natural fractures and tensional fracture initiating from rock body.
受天然裂缝和倾角的影响,水力裂缝在斜井井壁处可能存在3种起裂方式,分别为沿天然裂缝面张性起裂、沿天然裂缝面剪切破裂和从岩石本体起裂。
2.
There are possibly three initiation modes of hydraulic fracture on wellbore because of influence of the trend and dip of natural facture.
根据天然裂缝产状和地层地应力状态,建立了水力裂缝3种起裂方式的起裂压力计算模型,给出了水力裂缝起裂方式和起裂压力的判别方法。
补充资料：油气田开发方式(见油气田生产方式)
油气田开发方式(见油气田生产方式)
development pattern of oil and gas field:see recovery pattern of oil and gas field
a垃d gas月e卫d) 、‘。尸卫Jlent见油气田小冰、*pa士teroof ojl
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条