1)  sandwich cell
夹层电池
1.
The photovoltaic characters of the sandwich cell,SnO_2/chla/PVA/SnO_2,were reported.
报道了光透电极叶绿素夹层电池SnO_2/chla/PVA/SnO_2的光电特性,讨论了电池发生光电效应的机理,说明了电池的暗整流作用和光照时电荷分离的结点为chla/PVA。
2)  interlayer
夹层
1.
The distribution characteristics of interlayer in thick channel sand oil reservoir in LaSaXing Oilfield;
喇萨杏油田河道砂岩厚油层夹层分布特征
2.
A nalysis of controlling function of interlayer on the oil reservoir-taking Sangonghe formation of Moxizhuang are-a, Block No. 1, middle part of Junggar Basin as an example;
夹层对油藏的控制作用分析——以准噶尔盆地中部1区块莫西庄地区三工河组为例
3.
Effect of a La_(0.8)Sr_(0.2)Ga_(0.8)Mg_(0.15)Co_(0.05)O_3 interlayer synthesized by the citrate method on the cathode performance;
柠檬酸盐法制备的La_(0·8)Sr_(0·2)Ga_(0·8)Mg_(0·15)Co_(0·05)O_3夹层对阴极性能的影响
3)  interbed
夹层
1.
Study on relationship between bottom water and interbed of heavy oil during steam stimulation.;
底水稠油油藏蒸汽吞吐底水与夹层关系数值模拟
2.
Analysis of intrastratal interbed influence on the result of tapping the potential of the horizontal well in positive rhythm and thick oilbearing formations.;
正韵律厚油层层内夹层对水平井挖潜效果的影响分析
3.
Effect of interbed on development effectiveness of low-permeability oil-bearing sand;
夹层对低渗透油层开发效果的影响
4)  intercalation
夹层
1.
Analysis of sedimentary system and intercalation characteristics of braided delta: A case study of Anfeng in Hai'an depression;
辫状三角洲沉积体系夹层分布特征研究——以海安凹陷安丰辫状三角洲为例
2.
Classification of intercalation and the longitudinal remaining oil distribution pattern in reverse rhythm thick reservoir-taking 8-15 sand bodies of Es_2 in Shengtuo oilfield as examples.;
反韵律厚油层夹层分类及纵向剩余油分布模式——以胜坨油田沙二段8~15砂层组为例
3.
Study on intercalation characteristics inside channel sandbodies;
河道砂体内部夹层特征研究
5)  dissection
夹层
1.
Remodeling pattern of subacute Stanford B aortic dissection after endovascular exclusion;
亚急性Stanford B型主动脉夹层腔内隔绝术后瘤体重构分析
2.
Delayed complications after endovascular exclusion for Stanford Type B aortic dissections;
Stanford B型主动脉夹层腔内隔绝术后远期并发症
3.
Spiral CT diagnosis of atypical aortic dissection;
不典型主动脉夹层螺旋CT诊断
6)  dissecting
夹层
1.
Analysis of diagnosis,missed diagnosis and misdiagnosis in 570 cases of aortic dissecting aneurysm;
夹层动脉瘤570例临床确诊及误、漏诊原因分析
2.
The value of 16-slice spiral CT angiography in diagnosis of dissecting aneurysm of aorta;
十六层螺旋CT血管成像对主动脉夹层的诊断价值
3.
Endovascular repair for aortic dissecting aneurysm combined with aberrant right subclavian arteries;
合并迷走右锁骨下动脉的主动脉夹层4例报告并文献复习
参考词条
补充资料：蜂窝夹层结构
分子式：
CAS号：

性质：由面板(蒙皮)与轻质蜂窝芯材通过胶黏剂粘接成的层状复合结构。夹层结构面板可以是铝板或者碳纤维、玻璃纤维、芳纶纤维复合材料板。常用的蜂窝芯材料为铝箔、芳纶纸、玻璃布和牛皮纸等。夹层结构的突出特点是：弯曲刚度大，可充分利用材料的强度，重量轻。蜂窝夹层结构可以一次成型即上下面板的成型固化和面板与蜂窝芯的胶接固化是同时完成的；也可以二次成型即上下面板的成型固化与面板芯材的胶接固化先后分两次固化；也可以三次成型，则是上面板固化、下面板固化和面板芯材胶接固化，先后分三次进行。铝板作面板时需要在胶接之前进行表面处理，以提高胶接强度。夹层结构在飞机上应用比较广泛，如翼面、舵面、舱面、壁、地板、雷达罩等，还可以用作火车、地铁、汽车上的各种隔板，用玻璃纤维复合材料或芳纶复合材料为蒙皮以铝蜂窝芯、芳纶纸蜂窝芯制造的赛艇、游船性能优异，另外在滑水板、冲浪板、滑雪板等体育用品方面也得到应用。厚型的粗蜂窝夹层结构可用作建筑墙板，隔音、隔热效果好。

说明：补充资料仅用于学习参考，请勿用于其它任何用途。