1) cyclic strcss/strain response
循环应力应变响应
2) cyclic stress response
循环应力响应
1.
The influence of solid solution and(or) aging treatment on the cyclic stress response behavior,cyclic stress-strain behavior,strain fatigue parameters and fatigue life of the extruded AZ81 magnesium alloy under fatigue loading was investigated.
研究了固溶、时效处理对挤压变形AZ81镁合金在疲劳加载条件下的循环应力响应行为、循环应力-应变行为、应变疲劳参数以及疲劳寿命的影响。
2.
Through total strain-controlled fatigue tests and analysis on fracture surfaces of fatigued specimens,the cyclic stress response and fatigue life behaviors as well as fracture mechanism were identified for as-extruded AZ81 magnesium alloy.
通过总应变幅控制的疲劳实验和断口形貌分析,确定了挤压变形AZ81镁合金的循环应力响应行为、疲劳寿命行为和断裂机制。
3.
Through performing total strain-controlled fatigue tests at room temperature,the cyclic stress response,fatigue life and cyclic stress-strain behaviors were investigated for the hot-extruded Mg-x%Al-3%Ni alloys with different contents of Al.
通过对挤压变形Mg-x%Al-3%Ni合金进行总应变控制模式的室温疲劳实验,研究了不同含Al量的挤压变形Mg-x%Al-3%Ni合金的循环应力响应行为、疲劳寿命行为和循环应力-应变行为。
3) cyclic changeable stress
循环变应力
4) stress-strain cycle
应力-应变循环
1.
Effects of the annealing and deforming temperatures, thermal cycle, and the stress-strain cycle on the transformation and deformation characteristics of Ti49.
用示差扫描量热仪、拉伸实验和应力-应变循环实验系统研究了退火温度、变形温度以及热循环和室温应力-应变循环对Ti_(49。
5) cyclic stress strain
循环应力应变
1.
Making a comparison between effects of two types of cyclic stress strain empirical equations σ= 1.
通过试验对拉压载荷下材料的循环应力应变关系进行测试 ,建立了表达式 σ=kεpm中常数 k、m与材料的静抗拉强度间的经验式 ,并用该方程式可以直接由材料的静抗拉强度比较简便地预测材料的疲劳强度。
6) cyclic stress-strain
循环应力-应变
1.
Three dimensional nonlinear cyclic stress-strain analysis of gas turbine rotor disk-blade system;
燃气涡轮转子盘-片系统三维非线性循环应力-应变分析
2.
In this paper,the character of cyclic stress-strain is theoretically analysed by means of the randomprocess and the method for statistic measure is given,Cyclic stress-strain curve clan with distribution formis obtained from test result.
鉴于试验数据分散性，用随机过程的方法对循环应力－应变特性进行了理论分析，并给出了统计测定的方法，试验结果得到了呈分布状的循环应力－应变曲线族，证实了理论分析的正确性。
3.
Through performing total strain-controlled fatigue tests at room temperature,the cyclic stress response,fatigue life and cyclic stress-strain behaviors were investigated for the hot-extruded Mg-x%Al-3%Ni alloys with different contents of Al.
通过对挤压变形Mg-x%Al-3%Ni合金进行总应变控制模式的室温疲劳实验,研究了不同含Al量的挤压变形Mg-x%Al-3%Ni合金的循环应力响应行为、疲劳寿命行为和循环应力-应变行为。
补充资料：动态应力-应变曲线
分子式：
CAS号：
性质： 在具有强迫正弦振荡的动态试验中，让黏弹性体作稳定振动，以力对变形作图，在十个周期中的轨迹为一封闭曲线，称之为动态应力-应变曲线。动态试验的结果取决于试验条件：试样形状、形变方式、应变振幅、应变历程、频率和温度。从动态应力-应变曲线可以求得黏弹性体的许多动态力学性能，如从封闭曲线面积可以求得在一个周期内材料内部的发热量。
CAS号：
性质： 在具有强迫正弦振荡的动态试验中，让黏弹性体作稳定振动，以力对变形作图，在十个周期中的轨迹为一封闭曲线，称之为动态应力-应变曲线。动态试验的结果取决于试验条件：试样形状、形变方式、应变振幅、应变历程、频率和温度。从动态应力-应变曲线可以求得黏弹性体的许多动态力学性能，如从封闭曲线面积可以求得在一个周期内材料内部的发热量。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条