1) crystallinity
晶性
2) crystallizability
结晶性
1.
Carboxymethyl starch was prepared from cornstarch by using a dry method,and the molecular structure,granule configuration and crystallizability of the carboxymethyl starches with different substitution degree were investigated by using ultrared spectrograph,electro scanning microscope and x-ray crystallograph.
以玉米淀粉为原料,干法制备羧甲基淀粉,并利用红外光谱仪、扫描电子显微镜和X-射线衍射仪对不同取代度的羧甲基淀粉的分子结构、颗粒形貌及结晶性进行了研究。
2.
But the crystallizability of iron oxide prepared via mic.
在表面活性剂／油比较高时,可以制备出粒径小于10 nm的氧化铁,但所制备的氧化体的结晶性较差。
3) crystallinity
结晶性能
1.
In this paper,the effect of APP and Deflam on the flame retardance,the mechanical properties of the prepared composite,and the crystallinity of PP were studied.
采用聚磷酸铵(APP)和Deflam(敌火龙)分别对聚丙烯(PP)进行了填充改性,研究了两者对PP力学性能、阻燃性能、结晶性能的影响。
2.
The effects of nano-CaCO_3 particles on the crystallinity of PCL and the nano-CaCO_3 content on the mechanical properties as well as shape memory properties of the blends were investigated.
用熔融共混法制备了聚己内酯(PCL)/纳米CaCO3复合材料,考察了纳米CaCO3对PCL结晶性能和纳米CaCO3含量对PCL/纳米CaCO3复合材料力学及形状记忆性能的影响。
3.
The influence of glass fiber, flame retardant and nucleating agent on the crystallinity and mechanical properties of polyethylene terephthalate (PET) was investigated.
研究玻纤、阻燃剂和纳米成核剂对聚对苯二甲酸乙二酯(PET)结晶性能及力学性能的影响。
4) crystallinity
结晶性
1.
Studies on the Sequence Structure and Crystallinity of Poly(butylene succinate) Copolymers with Terephthalic Acid;
生物可降解共聚物聚丁二酸/对苯二甲酸丁二醇酯(PBST)的序列结构及结晶性研究
2.
Study on the crystallinity, thermal stability and transportation of polyschiff's base containing triarylated amine cavity transporting materials;
含三芳胺聚西夫碱空穴输送材料结晶性、热稳定性和传输性研究
3.
Under some degree of denaturalization several kinds of modified starch still show Maltese cross phenomena and crystallinity, and maintain characteristics of rigid granules.
利用光学显微镜和X射线衍射对玉米变性淀粉的颗粒形貌和结晶结构进行了研究和讨论,揭示出一定变性度下,不同的变性淀粉仍然具有球晶结构和结晶性,保持其刚性粒子特性。
5) crystallization properties
结晶性能
1.
Effect of CeO2 on break temperature and crystallization properties of mold fluxes,and the comparison of properties between low-fluoride and high-fluoride content mold fluxes were studied.
研究了低氟条件下,稀土氧化物CeO2对连铸保护渣转折温度和结晶性能的影响,同时与常规的高氟连铸保护渣性能进行了对比分析。
2.
Based on the summarization of current situation of fluorine-free mould fluxes at home and abroad,the main problem during decreasing fluorine for high carbon steel and peritectic steel mould fluxes was analyzed,which includes the stability between viscosity and temperature at high temperature as well as effective control of crystallization properties.
综述了国内外无氟连铸结晶器保护渣发展状况,分析了目前高碳钢和包晶钢(特别是亚包晶钢)用保护渣降氟过程中面临的主要问题:高温时粘度-温度特性的稳定性以及保护渣结晶性能的有效控制。
3.
The influence of cooling rate on the crystallization properties of mold fluxes was studied by WCT-2 Differential Thermal Analysis(DTA) balance and LEITZ optical microscope equipped with 1350CC heating stage.
采用 ＷＣＴ－２型差热分析天平和ＬＥＩＴＺ光学显微镜（配有 １３５０℃高温热台），研究了 冷却速率对连铸保护渣结晶性能的影响。
6) liquid crystalline property
液晶性
1.
The effect of flexible spacer length on the liquid crystalline property of ABA-type triblock copolymers containing azobenzene groups was investigated.
研究了间隔基长度对基于 ATRP 的 ABA 型嵌段共聚物液晶性影响。
参考词条
补充资料：非晶性聚烯烃
分子式：
分子量：
CAS号：
性质：简称APO。单烯烃与多环烯烃共聚而得的一类非晶性高透明度热塑性树脂。其突出优点是光学性能比聚碳酸酯和聚甲基丙烯酸甲酯好，透光率达90%，双折射率则比聚碳酸酯略小而与聚甲基丙烯酸甲酯相当。此外还具有高耐热、高强度、高耐化学品、低吸水性及易加工等优点。是制激光光盘基板的理想材料，也可用以制光导纤维、透镜、液晶显示板等。可于齐格勒-纳塔催化剂存在下由乙烯或丙烯或其他α-烯烃与多环烯烃（如双环戊二烯、5-亚乙基-2-降冰片烯、环十二碳三烯、甲基环十二碳三烯）等经溶液聚合法制得。
分子量：
CAS号：
性质：简称APO。单烯烃与多环烯烃共聚而得的一类非晶性高透明度热塑性树脂。其突出优点是光学性能比聚碳酸酯和聚甲基丙烯酸甲酯好，透光率达90%，双折射率则比聚碳酸酯略小而与聚甲基丙烯酸甲酯相当。此外还具有高耐热、高强度、高耐化学品、低吸水性及易加工等优点。是制激光光盘基板的理想材料，也可用以制光导纤维、透镜、液晶显示板等。可于齐格勒-纳塔催化剂存在下由乙烯或丙烯或其他α-烯烃与多环烯烃（如双环戊二烯、5-亚乙基-2-降冰片烯、环十二碳三烯、甲基环十二碳三烯）等经溶液聚合法制得。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。