1) Fluidized Bed Spray
流化喷雾造粒
1.
Study of Preparing The Low-Sugar Quick-Dissolve Beau Powder By The Fluidized Bed Spray Granulator Method (Ⅰ)──Experimental Study Of The Fluidzed BedSpray Gtanulator Mechanism;
流化喷雾造粒法制取低糖速溶豆粉的研究（Ⅰ）──流化喷雾造粒机理的实验研究
3) spray pelletization
喷雾造粒
1.
Sintering behavior of white carbon black particles by spray pelletization;
喷雾造粒白炭黑微球的烧结行为
2.
In order to improve the properties of the SiO2 particles by spray pelletization, the influences of heat treatment process on the apparent density, flowability and size distribution of the SiO2 particles were studied.
研制了一种以SiO2为基体的高温可磨耗封严涂层,为了改善二氧化硅喷雾造粒粉体的性能,研究了热处理工艺对粉体松装密度、流动速度及粒度分布的影响。
3.
The effect of SiC slurry solid content and spray drying technique on the character of spray pelletization powders was investigated.
以水为液体介质,制备分散稳定的水基SiC料浆,并利用喷雾造粒技术对水基SiC浆料进行造粒,研究了碳化硅浆料固含量及喷雾干燥工艺对造粒粉特性的影响。
4) spray granulation
喷雾造粒
1.
Research progress of fluidized-bed spray granulation;
流化床喷雾造粒的研究进展
2.
Study on slurry for spray granulation in manufacturing NiZn ferrite powder
NiZn铁氧体粉料生产中喷雾造粒用料浆的研究
3.
Solid spherical granules are often produced in spray granulation,and sometimes some morphologies such as pores,dimples appear in the surface of granules.
喷雾造粒是将溶液或悬浮液等原料喷雾固化后制成一定形状和强度的细小颗粒的一种重要的造粒方法。
5) spray prilling
喷雾造粒
1.
Technology control of spray prilling of liquid-phase sintering SiC;
液相烧结碳化硅喷雾造粒工艺控制
2.
The effective factors of SiC premix powder spray prilling were analyzed through the experiments.
通过SiC喷雾造粒试验,分析了影响SiC造粒粉性能的因素,如进出口温度、浆料的固含量、喷雾压力及进料速度等;同时总结出了喷雾造粒时的合理工艺,制备出了松装密度为0。
3.
% nano-TiO -2 powder prepared by spray prilling were investigated in consideration of dispersant content,binder content and solid loading.
本文研究了分散剂、粘结剂及固相含量等流变学因素对喷雾造粒粉体流动性的影响。
6) spray-granulation
喷雾造粒
1.
Particle growth mechanisms and the effects on them of fluidising gas velocity, liquid feedrate and initial particle size have been studied experimentally in a batch vibro- fluidized bed spray-granulation.
在间歇操作的振动流化床中,实验研究了喷雾造粒的颗粒成长机理以及流化速度、进风温度、料液加料速度、初始物料颗粒尺寸大小对造粒的影响。
补充资料：流化床造粒
分子式：
CAS号：
性质：又称沸腾床造粒。肥料的一种送粒技术。溶液、料浆或熔体，喷淋在流化物料床中，主要以涂布机理使粒子长大，这种造粒工艺往往把造粒与干燥或造粒与冷却结合在同一设备内完成。
CAS号：
性质：又称沸腾床造粒。肥料的一种送粒技术。溶液、料浆或熔体，喷淋在流化物料床中，主要以涂布机理使粒子长大，这种造粒工艺往往把造粒与干燥或造粒与冷却结合在同一设备内完成。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条