1) porous C/SiC composites
多孔C/SiC复合材料
1.
The porous C/SiC composites have good mechanical properties and good infiltration property.
以玻璃纤维为成孔剂,采用孔隙预置技术制备了发汗多孔C/SiC复合材料。
2) C/C-SiC composites
C/C-SiC复合材料
1.
Effects of fiber dispersion on mechanical properties of C/C-SiC composites;
纤维分散对C/C-SiC复合材料力学性能的影响
2.
Preparation of C/C-SiC composites by molten silicon infiltration method;
熔融硅液相浸渍法制备C／C-SiC复合材料
3.
Effect of sliding speed on friction and wear behaviors of RMI-C/C-SiC composites;
刹车速度对RMI-C/C-SiC复合材料摩擦磨损行为的影响
3) C/C-SiC composite
C/C-SiC复合材料
1.
Influence of adding Al on the microstructure and mechanical properties of C/C-SiC composites fabricated by MSI;
添加Al对MSI制备C/C-SiC复合材料组织和力学性能的影响
2.
Manufacture procedure of short carbon fibre reinforced C/C-SiC composite;
短纤维增强C/C-SiC复合材料的制备工艺
3.
Structure and fracture mechanism of short fibre reinforced C/C-SiC composites;
短纤维C/C-SiC复合材料的组织结构与断裂机制
4) C/SiC composites
C/SiC复合材料
1.
Fiber fabric 3D simulation and influence on properties of C/SiC composites;
编织结构三维仿真及其对C/SiC复合材料性能的影响
2.
Non-isothermal oxidation behavior of C/SiC composites rapidly prepared by molten silicon infiltration technique;
熔硅浸渗工艺快速制备C/SiC复合材料的非等温氧化行为
3.
Correlation of PyC/SiC interphase to the mechanical properties of 3D HTA C/SiC composites fabricated by polymer infiltration and pyrolysis;
PyC/SiC界面相对PIP法制备3D HTA C/SiC复合材料性能的影响(英文)
6) MgO-SiC-C composites
MgO-SiC-C复合材料
1.
Mechanical properties and thermal shock resistance of MgO-SiC-C composites;
MgO-SiC-C复合材料力学性能和抗热震性能研究
补充资料：多孔羟基磷灰石陶瓷-聚乳酸复合材料
分子式：
CAS号：
性质：有聚乳酸浸渍涂层的多孔羟基磷灰石(HA)复合材料。将多孔珊瑚状的HA陶瓷浸入DL-聚乳酸的丙酮溶液中(丙酮：聚乳酸=3:1～30:1)，取出干燥8～12h而制得。该复合材料较之未涂层材料，其压缩强度提高近4倍，压缩刚性提高30％，断裂吸收也提高30％左右。动物实验结果表明，这种复合材料已具有类似于来涂层的多孔HA陶瓷的成骨性能，但其初始强度已大大提高。
CAS号：
性质：有聚乳酸浸渍涂层的多孔羟基磷灰石(HA)复合材料。将多孔珊瑚状的HA陶瓷浸入DL-聚乳酸的丙酮溶液中(丙酮：聚乳酸=3:1～30:1)，取出干燥8～12h而制得。该复合材料较之未涂层材料，其压缩强度提高近4倍，压缩刚性提高30％，断裂吸收也提高30％左右。动物实验结果表明，这种复合材料已具有类似于来涂层的多孔HA陶瓷的成骨性能，但其初始强度已大大提高。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条