1) unscrewing torque
脱模扭矩
1.
This paper dears with the study on unscrewing torque for plastics thread part.
在此基础上推导出了新的脱模扭矩计算公式,公式表明,脱模扭矩的大小与塑料的弹性模量、泊松比、脱模时的收缩率、摩擦系数、塑件平均壁厚、螺纹牙尖角、螺牙高、扭径等因素有关。
3) torque calculation model
扭矩计算模型
1.
A torque calculation model of the cutter head in a test shield tunneling machine was presented based on the analysis of the factors and elements of the cutter head torque of the earth-pressure-balance tunneling machine,and its simulation model was built by AMESim soft.
在模拟盾构平台上,试验研究了盾构刀盘驱动扭矩在不同土层的特性以及刀盘扭矩与刀盘开口率的关系,与仿真结果基本一致,验证了扭矩计算模型的正确性并通过修正系数改进了该模型。
4) torque
[英][tɔ:k] [美][tɔrk]
扭矩
1.
Influence of Twin-screw Extruder Screw Element Type on the Torque and Pressures during Extrusion;
双螺杆挤压机螺杆元件类型对扭矩和压力的影响
2.
The design of the explosion-proof torque recorder based on snap-in chip;
基于嵌入式芯片的防爆扭矩记录仪的设计
3.
New model for forecasting drag and torque in Extended Reach Well.;
大位移井摩阻/扭矩预测计算新模型
5) torque moment
扭矩
1.
Analysis of torque moment in friction stir welding;
搅拌摩擦焊中的扭矩分析
2.
Tests of measuring torque moment verified that circuits with four strain gauges could get rid of the influence exerted by the bending moment.
介绍了三种测应变的线路,通过实验证实,在测扭矩时,用4片电阻应变片构成的线路,可以排除弯矩的影响。
3.
It is a widely existent phenomenon that the working torque moment of theConform machine main shaft undulates periodically.
CONFORM机主轴工作扭矩周期性波动是一种普遍存在的现象。
6) twisting moment
扭矩
1.
Based on the disassembling and examining and analyzing of the broken shaft, the over twisting moment or over torque trouble caused by blocking steel and retreating steel is determined and the improving proposals are put forward.
针对一起生产企业和设备生产厂家有争议的SWC440万向轴断轴事故进行了检测分析,通过对断轴进行解体、检测、分析认定,由于“卡钢”和“退钢”造成扭矩或转矩过大形成事故。
2.
By computing the twisting moment of one cap beam by traditional and finite element method respectively,the differences between the two methods are got.
通过分析用常规计算方法和有限元算法对同一桥墩进行扭矩计算结果的巨大差异,得出了常规算法过于保守,不利于客观地评定盖梁的抗扭承载力,同时也说明了用空间梁单元,计算盖梁扭矩的合理性。
补充资料：扭矩传感器
分子式：
CAS号：
性质：能使物体产生某种程度的扭转变形的力偶或力矩称为扭转力矩，简称扭矩。扭矩测量是各种机械产品的测试分析、质量检验中的重要参数；另外，为了及时监测运动中的设备的负荷大小和运行状况，则要对扭矩进行在线检测。扭矩传感器有磁弹性扭矩传感器、电阻应变片式扭矩传感器、和磁电式、光电式相位差扭矩传感器等。
CAS号：
性质：能使物体产生某种程度的扭转变形的力偶或力矩称为扭转力矩，简称扭矩。扭矩测量是各种机械产品的测试分析、质量检验中的重要参数；另外，为了及时监测运动中的设备的负荷大小和运行状况，则要对扭矩进行在线检测。扭矩传感器有磁弹性扭矩传感器、电阻应变片式扭矩传感器、和磁电式、光电式相位差扭矩传感器等。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条