1) average stress model
平均应力模型
2) Average reaction rate model
平均反应率模型
3) Mean stress
平均应力
1.
The effect of mean stress was studied.
为了进一步拓宽超声疲劳试验的研究范围,对50钢进行了含有平均应力的三点弯曲和非对称拉压疲劳性能试验,得到相应的疲劳 S-N 曲线,研究了平均应力对其超高周疲劳性能的影响。
2.
The author investigates the effect of mean stress and stress's amplitude with the non symmetry low cycle fatigue (LCF) experiment of two kinds of PD3 rail steel (hot rolling and off line heat treatment) produced by PanZhiHua steel company.
通过对攀钢生产的两种PD3钢轨钢 (热轧和离线全长热处理 )的非对称低周载荷疲劳实验 ,比较了平均应力和荷载幅值对两种PD3钢轨钢寿命的影响。
3.
Through the experimental results and study on the reason of fracture,we considered that mean stress and maximum shearing stress were different in tension and compression,condition of fracture was proposed.
通过观察实验现象和分析破坏原因,认为平均应力对脆断影响显著。
4) average stress
平均应力
1.
The concepts of effective stress and porous pressure are employed to explain why the tectonic average stress can be used as a coupling bridge between the solid skeleton and porous fluid.
依据连续介质力学理论,从理论上分析构造应力驱油的机理,应用孔隙压力和有效应力的概念,阐述了将多孔介质中的平均应力作为固体骨架和孔隙流体之间耦合桥梁的合理性。
2.
The effect coefficients of average stress for seven kinds of structural steel materials are presented on the basis of fatigue performance tested data in this paper.
基于实测的材料疲劳性能数据，给出７种结构钢的平均应力影响系数，可供疲劳设计使
3.
An equation for crack growth rate was derived to consider the trend of stress intensity factor range going down to the threshold and the average stress effect.
首先发展了考虑平均应力影响和低应力强度因子范围趋于门槛值现象的扩展率方程。
5) averaged model
平均模型
1.
Based on the averaged model, the stability of a cascaded system, which employs a voltage-mode controlled Buck converter and a second-order input filter, was investigated.
基于平均模型,研究含有2阶输入滤波器和电压型Buck变换器的级联系统稳定性问题。
2.
Using the averaged switch modeling approach,a non-linear large-signal averaged model of non-ideal PWM switch is derived,taking into account all parasitic resistances and threshold voltage of diode.
运用平均开关建模法,建立非理想PWM开关的非线性大信号平均模型,包含全部寄生电阻和二极管的正向压降。
6) average model
平均模型
1.
Simulation and analysis based on the cycle by cycle switch average model;
基于开关周期平均模型的仿真分析
2.
Relations between discounted models and average models for semi-Markov decision processes;
半Markov决策过程折扣模型与平均模型之间的关系
3.
An average model of synchronous generator-rectifier system was built using MATLAB/Simulink.
对同步发电机带整流负载系统进行分析,给出了发电机d、q轴电压电流与整流桥输出直流侧电压电流间的关系式,利用MATLAB/Simulink建立了发电机整流桥系统平均模型,并与精确仿真模型的运行结果进行了对比。
补充资料：极限应力平均差
分子式：
CAS号：
性质： 测出的最大作用力偏离平均作用力的值与无应力时试样的截面积之比；单位为Pa。是动态力学加载形式选择上所关心的参数之一。该值愈大，说明所加负载的应力振荡值较大。反之，说明所加交变应力比较平稳。
CAS号：
性质： 测出的最大作用力偏离平均作用力的值与无应力时试样的截面积之比；单位为Pa。是动态力学加载形式选择上所关心的参数之一。该值愈大，说明所加负载的应力振荡值较大。反之，说明所加交变应力比较平稳。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条