1) Enthalpies of solvation
溶剂化热
3) solvothermal synthesis
溶剂热
1.
Different size of Bi2S3 nanotubes and nanorods were synthesized in different reaction solvents by solvothermal synthesis.
利用溶剂热法在不同反应溶剂中制备了不同尺寸的Bi2S3纳米管和纳米棒。
4) solvothermal
溶剂热法
1.
Emulsifier-free poly(methyl methacrylate-styrene)[P(MMA-St)] cationic nanoparticles with an average diameter of about 40 nm were prepared in an acetone-water medium using 2,2-azobis(2-methylpropionamidine) dihydrochloride(AIBA) as the initiator by solvothermal method.
运用溶剂热法,以丙酮-水为分散介质,偶氮二异丁基脒盐酸盐(AIBA)引发苯乙烯(St)和甲基丙烯酸甲酯(MMA)共聚,制得粒径约为40nm的无皂阳离子聚(苯乙烯-甲基丙烯酸甲酯)纳米胶乳粒子[P(MMA-St)],其结构经TEM,FT-IR,TG和DTA表征。
2.
7O3 nanoparticles have been successfully synthesized by hydrothermal and solvothermal methods, and the synthesis mechanism was discussed.
采用传统的水热法和混合溶剂热法制备了高纯的四方相KTN纳米粉体KTa0。
3.
In the first part of this paper, several nano-sulfides with special structure andmorphology had been synthesized successfully by solvothermal method using thequaternary ammonium salt of 2-undecyl-1-dithioureido-ethyl-imidazoline (SUDEI) asthe surfactant, and characterized by TEM、SEM、XRD、EDS and IR, respectively.
本论文的第一部分是以月桂酸硫脲咪唑啉季铵盐(SUDEI)为表面活性剂，溶剂热法制备了几种具有特殊形貌与结构的纳米硫化物，分别用TEM、SEM、XRD、EDS、IR对产物进行了表征，探讨了该表面活性剂对在介观尺度下的有机-无机杂化凝聚体形成的作用。
5) solvent-thermal
溶剂热
1.
Preparation of 1D γ-alumina by solvent-thermal approach;
溶剂热法制备一维γ-Al_2O_3
2.
The characteristics and theory of solvent-thermal technique were stated.
阐述了溶剂热合成技术的原理与特点,并采用溶剂热晶化法成功合成了粒径在微米级的锐钛矿介孔氧化钛,利用透射电镜(TEM)、N2吸附、X射线衍射(XRD)和扫描电子显微镜(SEM)等表征手段研究了各反应条件对合成产物的影响。
3.
Highly crystalline ZnS nanoparticle was prepared by solvent-thermal method.
采用溶剂热法制备了结晶度良好的ZnS纳米粒子,通过XRD、TEM、UV-Vis-DRS等技术对所合成的ZnS粉体的结构和理化性能进行表征,并以亚甲基蓝为目标降解物,考察了ZnS粉体在紫外光和可见光下的光催化性能。
6) Solvothermal synthesis
溶剂热法
1.
This paper focuses on the novel properties of magnetics, field emission, electrochemistry, photoelectrochemistry and catalysis of well-ordered nanowire/rod/tube array materials, which are synthesized by vapor-liquid-solid method, vapor-solid method, templates and Solvothermal synthesis method.
概述了有序纳米线/棒/管阵列的性质、应用及制备方法的研究进展,着重介绍了有序纳米线/棒/管阵列材料的制备方法如气相-液相-固相生长法、气相-固相生长法、模板法和溶剂热法,以及阵列材料在磁、场发射、激光、电化学、光电化学和催化方面所具有的独特性质与应用,展望了该领域的研究前景。
2.
There are a variety of methods for the preparation of PZT, such as coprecipitation, solvothermal synthesis and sol-gel process, but the prepared PZT products are mostly in the size of micrometer-scale.
本文在前人工作的基础上，利用sol-gel法和溶剂热法的优点：可以使用的所有高纯原料均可处于溶液状态，在分子或原子水平上实现充分均匀混合，探讨了在非水溶剂中sol-gel法和溶剂热法在PZT粉体制备中的应用，并分别探讨了PZT制备的规律及特点： 1。
补充资料：离子化溶剂
分子式：
CAS号：
性质：介电常数较高的溶剂，溶质溶解后，基本上以自由离子形式存在，其离子对和离子缔合物所占的分数很少，此类溶剂叫做离子化溶剂。一般认为介电常数大于40的溶剂，离子对形成的可能性就较小，水的介电常数为78.30，显然是很好的离子化溶剂。
CAS号：
性质：介电常数较高的溶剂，溶质溶解后，基本上以自由离子形式存在，其离子对和离子缔合物所占的分数很少，此类溶剂叫做离子化溶剂。一般认为介电常数大于40的溶剂，离子对形成的可能性就较小，水的介电常数为78.30，显然是很好的离子化溶剂。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条